Topeak's BabySeat II rear rack allows you to easily mount your BabySeat II (sold separately) to your 29er. This tubular aluminum rack features tabs that clear most rear disc brake mounts so you can use your disc brake-equipped bike to run errands with your favorite little passenger.
Topeak's Explorer Tubular Rack is a great add-on for carrying a trunk bag, pannier or anything else you want to strap on. It's made of tubular aluminum, fits most bikes, and has a center strip that acts like a short fender, too.
Topeak's Explorer Tubular Rack is a great add-on for carrying a trunk bag, pannier or anything else you want to strap on. It's made of tubular aluminum, fits most bikes with disc brakes, and has a center strip that acts like a short fender, too.
Boost the carrying capacity of your Topeak MTX BeamRack (sold separately) with their Dual-Side Frame. It enables you to attach panniers and other Topeak MTX bags to your BeamRack.
The perfect quick-mount front rack system for road, cross, hybrid or touring bikes with rigid forks. This one-size-fits-all front rack features an innovative top plate that adjusts to levels independent of the fork angle. Integrated QuickTrack system allows Topeak TrunkBags to slide and lock into place and release with a the push of a button. Innovative hook-and-loop-strap mounting system cinches down tight to keep the load stable and allow mounting on a wide range of bikes. - Attachments: Fork with hook-and-loop straps - Adjustment: Strut slots - Material: Aluminum / Engineering grade polymer / Nylon straps - Compatibility: Topeak MTX / RX TrunkBags - Max Load: 7kg / 15lb - Clamp for front reflector, tail light mount - Size: 33 x 29. 3 x 12cm / 13" x 11.5" x 4.7" - Weight: 840g / 1.85lb
This expedition-worthy rack is made from 4130 chromoly, so it's tough, light and easily repairable in the field. It's also height-adjustable, so you can get your center of gravity as low as possible for a stable ride. The provided stainless steel hardware enables you to attach your rack to virtually any frame with 26-inch, 700c and 29-inch wheels. And, it hauls up to 80 pounds of gear and is powder-coated to protect it from the elements.
The Alternator Rack 190 is the rear rack solution for all Salsa 190mm-spaced Alternator dropout equipped frames. Load up your panniers, get off the beaten track, and start exploring! - NOTE: Deck requires a minimum of 320mm clearance from seatstay mounting points - NOTE: Salsa Rack-Lock needed for frames without upper seatstay mounts - Tubular AL-6061-T6 construction - 135 x 325mm cupped deck - Extra-long struts for improved range of fit. Straight and shaped (kinked) struts included - Large pannier hook stops - Black powdercoat finish - 15kg maximum recommended load - Mounting kit included - 765g
Set out on an adventure with Salsa's Alternator Rack. Built for 170mm-spaced dropouts, this rack is constructed of sturdy, light 6061 aluminum and finished with a black powder coat. The Alternator features large pannier hook stops, extra long struts for an impressive fit range and it includes a mounting kit.
With Salsa's Anything Cage, you can easily carry gear, like insulated Nalgene bottles, a small tent, or sleeping bag on your bicycle! This durable aluminum rack is designed for Salsa bicycles with their 3-hole high/low bottle mounts. It also attaches to standard bicycles with 2-hole bottle mounts simply by zip tying the rack's third foot. Cinching nylon straps are included for securing your items to the rack.
• Tubular 6061-T6 aluminum construction • Three-position mid-blade mount for improved fit • Large pannier hook stops • Powdercoat finish • Maximum recommended load 33lbs (15kg) • Requires inner and outer mid-blade eyelets
The Down Under HD Rack is the recommended lowrider for world touring. Sturdy and dependable, the steel construction lends itself well to field repairs should a worst-case scenario occur. - Requires dual-sided, mid-blade mounts - Wide crossbars provide sturdy, secure attachment points for a pannier - Tubular 4130 CroMoly construction - Mounting system provides 35mm range of infinite adjustment to position the rack - Includes mounting hardware kit - Powdercoat finish - Maximum Recommended Load: 55lbs (25kg) - Sold in pairs - Requires inner and outer mid-blade eyelets
The Salsa EXP Series Anything Cradle is a bracket-mount handlebar roll system that holds gear in front of your handlebars without kinking your cables. This modular system is designed for use with our EXP Series Side-Load or Top-Load Dry Bags, or you can use your own dry bag. The Anything Cradle allows you to distribute your gear evenly, which is essential to any well-balanced bikepacking setup. - Includes Anything Cradle and two 30" Salsa EXP Series Rubber Straps - Salsa EXP Series Rubber Straps are made of non-slip TPU to hold gear securely - Anything Cradle Arms are compatible with 35.0mm handlebars or 31.8mm handlebars (with included shim) - Nylon 6/6 composite cradle, 6061 forged aluminum arms - Maximum load weight: 8 lbs. (3.6kg)
The Portland Design Works Bindle Rack is a seatpost-mounted rack designed to easily haul your gear on multi-day cycling tours or just across town. The rack is constructed of lightweight alloy and mounts to any size seatpost in seconds. Heavy-duty compression straps loop through saddle rails to carry your cargo. The Bindle Rack helps to prevent side-to-side sway while riding and rear wheel rub for riders with short seat posts. Place your tent, sleeping bag, drybag, or other gear directly onto the Rack platform and pull the compression straps tight to secure the load up against the bottom of your saddle. - Rack mount fits seatposts with diameters 22.0 - 31.6mm - Rack deck measures 133 x 343mm (5.25 x 13.5") - Total Rack length: 432 mm (17") - Rack weight: .35kg (13 ounces) - Rated to 5.34kg - Lifetime PDWarranty
Jandd Low Front Mount Rack is an optimal choice when touring or commuting exclusively by road or in areas where ground clearance is not an issue. - Height (Overall): 14 inches - Height (Pannier Mounting): 12 inches - Width: 6 inches - Weight: 752 grams - Weight limit: 25 pounds
A disk brake compatible update of the original rear rack design where it all began for Blackburn in 1975 - Mounting system works with disc brake frames and bikes lacking rear dropout rack mounts - Lower mounting points attach to included extra-long QR skewer - Three strut design for maximum load control - 12mm gauge aircraft-grade aluminum rod ensures long lasting durability - Fits both wide and narrow tire - Fits 26" and 700c frames - Compatible with Copilot child seats - 535 grams - 40lbs/18.2kg carrying capacity
Blackburn's EX-1 rack does everything. Built for maximum durability of 9mm aircraft-grade 6061-T6 aluminum, this rack features a 3-strut design to control the load and is compatible with Copilot child seats (sold separately). It fits most bikes.
- Spring clip holds your gear - Classic 3-strut design for maximum load control - Fits 26”, 700c and 29” frames - Aircraft-grade 6061 aluminum tubing - Traditional mounting hardware - 45 lb/20.5 kg carrying capacity
- 304 grade stainless steel tubing - Easily straddles wider tires - Fits 26”, 700c and 29” frames - CoPilot child seat compatible - Traditional mounting hardware - 65 lb/29.5 kg carrying capacity
- Compatible with all bags and panniers - Blackburn Fit System mounts perfectly with 26", 700c or 29"wheels, disc compatible and will work with most brake or frame mounts - Light & reflector mounting loop - Aircraft-grade 6061 aluminum tubing - 45lb/20.5kg carrying capacity
- Compatible with all bags and panniers - Side rails included - Fits seatposts 22-32mm in diameter - No frame mounts required - Light and reflector mounting loop - Aircraft-grade 6061 aluminum tubing - 22lb/10kg carrying capacity
Versatility is the name of the game with this robust basket rack. You can install it front or rear, and the basket design makes it easy to carry groceries, extra clothes or whatever you need for everyday adventures. It’s both height- and width-adjustable and disc-brake compatible to fit almost any road or mountain bike. It also features an integrated clip to mount a Blackburn light for added visibility and nighttime riding. Details: - Universal swivel mounting hardware allows mounting on most adult bikes - Robust legs attach to the frame providing increased loading capacity - Horizontal leg loop for cargo strap hook - Install on the front or rear of your bike using front QR skewer or eyelets - Cargo net helps keep your groceries and gear secure - Adjustable width & height to accommodate most road and mountain bike hub and tire widths - For tire sizes 26", 650B, 700c, 27.5" and 29" and widths from 23c to 3" - Disc brake compatible - Light clip attachment - Lock holster - 45lbs/20.5kg capacity
- Blackburn Fit System – mounts perfectly with 26”, 700c or 29” wheels, disc compatible and will work with most brake or frame mounts - Removable top rack - Works well with most suspension forks - Low and high pannier mounts - Aircraft-grade 6061 aluminum tubing - 45lb/20.5kg carrying capacity
- Easton Scandium and aircraft-grade 6061 aluminum tubing - Blackburn Fit System – mounts perfectly with 26”, 700c or 29” wheels, disc compatible and will work with most brake or frame mounts - Narrow profile keeps pannier weight close to center for better balance - Low and high pannier mounts - Light & reflector mounting loop - 55lb/25kg carrying capacity
Axiom's Journey DLX Lowrider Front Rack is super light and super durable. This is perfect when you're way out in the middle of nowhere or just running errands, when every gram counts and gear failure is not an option. This rack is more than just strong, cornering clearance is exceptional due to the increased height, and it's still able to handle large, heavy panniers (sold separately). Additional looped struts keep the panniers steady and there are even safety tabs to prevent your bag hooks from accidentally sliding off.
Gear up and go long. Axiom's Journey Suspension & Disc Lowrider Front Rack gives you lots of extra carrying capacity. Designed for bikes equipped with front suspension bike and disc brakes, the Journey Suspension rack installs easily and assures excellent clearance so your load doesn't interfere with your bike's functions. With increased height for improved cornering and ground clearance, the Journey is perfect for going deep into the backcountry. It is made of light, rugged aluminum and handles heavy panniers (sold separately) with ease.
Axiom's Phoenix Rear Rack carries your gear in style and adds class to your ride. It features a black aluminum deck and a sturdy aluminum frame that is simple and easy to attach to your bike. The unique mounting system hides mounting bolts and keeps the Phoenix Rack looking good.
Axiom's Streamliner 29er DLX Rack centers loads close to the rear wheel for improved stability and handling on your 29er bike. It's made of reliable and lightweight aluminum, features struts to keep loads from getting close to the rear wheel, and offers ample heel clearance when you're carrying panniers.
$15.29 - $52.69
Wald bicycle racks offer a simple rear rack design for easy use. Lightweight, yet sturdy construction with simple mounting points located at eyelets near the rear axle and the brake mount. The 215 works perfectly with Wald's innovative 582 rear folding basket. - Simple design for easy use - Lightweight, yet sturdy - Steel rack w/adjustable brake bolt mount - Loading surface = 13" x 5" - Lightweight at just over 2 pounds
It's a classic, all-around carrier now updated for modern requirements. The Evo carrier has improved by adding 3D-feet with perfect force absorption and integrated screw attachment. The super-light mounting parts are included for mounting stays to the frame. Klick spring-clamp and rearlight protection. - Weight: 530g - Carrying Capacity: 40kg/88 pounds
It’s a classic, all around carrier now updated for modern requirements. The all around carrier has improved by adding 3D-feet with perfect force absorption and integrated screw attachment. New super light mounting parts are included for mounting stays to the frame. Klick spring-clamp and rearlight protection.
Page 1 of 4 Next page