Skip to main content

Filter By:

  • Show More Sizes
  • Show Fewer Sizes

29-Inch Wheel (29ers)

Scott Contessa Active 50
$499.99
The SCOTT Contessa Active 50 series features a super light Alloy Frame. The series comes fully equipped with a Suntour fork, perfect for those always on the go. - Aspect 700/900 Alloy Frame - Suntour XCE28 100mm Fork - Shimano Tourney TX 24 Speed Drivetrain - Tektro Hydraulic Disc Brakes - Kenda Booster 2.4" Tires
Scott Contessa Scale 920
$1,799.99
The SCOTT Contessa Scale 920's HMF Carbon Fiber Frame packs one heckuva punch. The 920 comes fully equipped with a SRAM Eagle drivetrain, and a FOX 32 Float fork, along with our RideLoc technology to allow for three travel settings to always optimize your ride. This bike is as race-ready as it gets. ICCR Cable Routing ICCR provides a clean look and a functional solution for all the different control cable standards on the market. Cable routing is fully internal and designed for full-length cable housing. Routing the cables internally omits bulky external hardware and looks cleaner. The cables can endure a longer lifetime as they are protected within the frame. The entry points are machined alloy removable inserts that come along with the frame and can be chosen according to the setup of the bike. Assembling an electronic group or a dropper post will not be a problem and the look will always be clean-cut. SW Dropouts We’ve redesigned all the parts that can give us significant benefits in terms of performance and functionality. The new dropouts are designed to be integrated on the thru-axle system thanks to a hollow tubular design that allows a simple and lightweight structure. Available for SRAM and Shimano DM derailleurs, this dropout increases stiffness and avoids damage to the frame in case of impacts on the rear derailleur. 29-Inch Wheels Improved roll-over is the most noticeable attribute when it comes to 29” wheels. The big wheels are great for rolling over nasty roots and rocky sections, essentially making it easier to ride these conditions. Improved traction is also a key factor with the increased wheel diameter compared to 27.5” wheels as tire contact to the ground is larger. - Scale Carbon HMF Frame - FOX 32 Float Rhythm 100mm Fork w/RideLoc 3-Position Remote - SRAM SX Eagle 12 Speed Drivetrain - Shimano MT401 Hydraulic Disc Brakes - Syncros X-25 TR Rims - WTB Ranger 29 x 2.25" Kevlar Tires
Scott Gambler 930
$3,699.99
The all NEW Gambler was designed for one thing and one thing only—pure, unadulterated speed. We made it to get you to take lines you'd never thought imaginable, to make you want to go to the bathroom before your race run - twice. We made it so that when you drop out of the start gate, the only aspect holding you back will be, well, you. The Gambler 930 is the lightweight alloy DH bike of your dreams, and it too is simply fast. SW Dropouts - On the Scale, Spark, Genius, Ransom and Gambler we’ve redesigned all the parts that can give us significant benefits in terms of performance and functionality. On the previous model the support of the dropout was a bulky additional part molded to the carbon chain stay. The new dropouts are designed to be integrated on the thru-axle system thanks to a hollow tubular design that allows a simple and light weight structure. Available for SRAM and Shimano DM derailleurs, this dropout increases the stiffness and avoids damage to the frame in case of impacts on the rear derailleur. One Frame Two Wheel Sizes - With our mountain bikes, we try to achieve ultimate versatility. These specific models can switch from 27.5" to 29" wheels with nothing more than the flip of a chip. No need to change the fork, all you need to do is flip a shock mount chip, change your wheels and off you go. The flip chip allows us to maintain a similar BB height when switching from one wheel size to the other which is key to keeping handling similar for both wheel sizes. With 27.5" wheels, you can run either 2.5", 2.6" or 2.8" tires. For the 29er, anywhere from 2.4"-2.6" is good to go. 29" Wheels - Improved roll-over is the most noticeable attribute when it comes to 29” wheels. The big wheels are great for rolling over nasty roots and rocky sections, essentially making it easier to ride these conditions. Improved traction is also a key factor with the increased wheel diameter compared to 27.5” wheels as tire contact to the ground is larger. - Best Roll-Over Performance - Carries Momentum - Maximum Traction surface - Best stability on easy trails - Lowest suspension stress - Great for larger frame sizes - Increase stability on long curve Key Features - Gambler Alloy Frame - RS Boxxer Select 200mm Fork - X-Fusion Vector R 200mm Shock - SRAM X5 8-Speed - Shimano 4 Piston disc brakes - Maxxis Assegai 2.5" DH Tires
Scott Genius 920
$4,499.90
The Genius was put on this earth to get you up mountains with ease and to get you back down them in a flash. The Genius 920 features our TwinLoc Suspension System to always optimize your ride. With a SRAM Eagle drivetrain and Syncros components, the Genius 920 is action ready. Any Trail. Any Time. Evo-Lap Technology - With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up. - With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. - With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we’ve optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without a sacrifice in the stiffness, comfort or impact resistance. The entire range benefited from our EvoLap technology. ICCR Cable Routing - On the Scale, Spark, Genius and Ransom, to provide a clean look and a functional solution for all the different control cable standards on the market, cable routing is fully internal and designed for full length cable housing. Routing the cables internally omits bulky external hardware and looks cleaner. The cables can endure a longer lifetime as they are protected within the frame. The entry points are machined alloy removable inserts that come along with the frame and can be chosen according to the setup of the bike. Assembling an electronic group or a dropper post will not be a problem and the look will always be clean-cut. SW Dropouts - On the Scale, Spark, Genius, Ransom and Gambler we’ve redesigned all the parts that can give us significant benefits in terms of performance and functionality. On the previous model the support of the dropout was a bulky additional part molded to the carbon chain stay. The new dropouts are designed to be integrated on the thru-axle system thanks to a hollow tubular design that allows a simple and light weight structure. Available for SRAM and Shimano DM derailleurs, this dropout increases the stiffness and avoids damage to the frame in case of impacts on the rear derailleur. Fox Nude TR Shock - On several Ransom and Genius models, you'll find the all new FOX NUDE TR EVOL. What the TR allows you to do is to select what sort of progression you would like in Descend mode: more linear, or more progressive. By flipping the Ramp Adjust Lever, you can decide how your shock behaves while descending. - A more linear shock gives a rider the same amount of support throughout a shock's travel. The suspension is supple throughout, and is "easier" to reach the end of the travel, or "bottom out." A more progressive shock will offer more support towards the end of travel, and is harder to bottom out. - These settings are really linked to riding speed. When it is wet, techy, or when impacts are small and riding tends to be slower, one might favor the more linear setting. When the conditions are dry and fast, or when bigger impacts are in play (jumps for instance), then the progressive mode is ideal. With the NUDE TR Evol, choosing and changing is easy. Key Features - Genius Carbon HMF-Alloy Frame - FOX 34 Float Performance 150mm Fork - FOX Nude TR EVOL, TwinLoc, 150mm - SRAM GX Eagle 12 Speed - Shimano SLX 4 Piston Disc Brakes - Syncros Revelstoke 2.0 TR Wheels - Maxxis Kevlar Tires - Syncros Dropper Post and Parts
Scott Ransom 900 Tuned
$7,599.99
The Ransom. 170mm of trail-munchin', climb-crushing, stage-winning, all-day-pinning mountain biking excellence. The Tuned version comes equipped with our TwinLoc Suspension System, a SRAM Eagle groupset, and high-end Syncros components to help you get away with murder, regardless of your ability level. Evo-Lap Technology With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up. With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we’ve optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super-light and compact frame without a sacrifice in the stiffness, comfort or impact resistance. The entire range benefitted from our EvoLap technology. ICCR Cable Routing On the Scale, Spark, Genius and Ransom, to provide a clean look and a functional solution for all the different control cable standards on the market, cable routing is fully internal and designed for full length cable housing. Routing the cables internally omits bulky external hardware and looks cleaner. The cables can endure a longer lifetime as they are protected within the frame. The entry points are machined alloy removable inserts that come along with the frame and can be chosen according to the setup of the bike. Assembling an electronic group or a dropper post will not be a problem and the look will always be clean-cut. SW Dropouts On the Scale, Spark, Genius, Ransom and Gambler we’ve redesigned all the parts that can give us significant benefits in terms of performance and functionality. On the previous model the support of the dropout was a bulky additional part molded to the carbon chain stay. The new dropouts are designed to be integrated on the thru-axle system thanks to a hollow tubular design that allows a simple and light weight structure. Available for SRAM and Shimano DM derailleurs, this dropout increases the stiffness and avoids damage to the frame in case of impacts on the rear derailleur. Ransom Carbon Construction While we always aim to have lightweight carbon bikes here at SCOTT, we never compromise frame strength when doing so. Taking into consideration the riding this bike is designed for, we have created our strongest carbon frame to date. Through clever layering and reinforcement in certain zones we obtain the stiffness wanted between the head tube and the rear wheel axle via a path following the downtube and the chainstays - we call this the stiffness backbone. The Ransom being a 1x only bike allowed us to optimize the width of the main pivot which is normally the weak point on this stiffness path. Additionally, the Trunnion mount on the DT close to the BB allows us to obtain great stiffness at the bottom of the bike and lightweight construction up top for compliance and for having the center of gravity as low as possible. Fox Nude TR Shock - On several Ransom and Genius models, you'll find the all new FOX NUDE TR EVOL. What the TR allows you to do is to select what sort of progression you would like in Descend mode: more linear, or more progressive. By flipping the Ramp Adjust Lever, you can decide how your shock behaves while descending. - A more linear shock gives a rider the same amount of support throughout a shock's travel. The suspension is supple throughout, and is "easier" to reach the end of the travel, or "bottom out." A more progressive shock will offer more support towards the end of travel, and is harder to bottom out. - These settings are really linked to riding speed. When it is wet, techy, or when impacts are small and riding tends to be slower, one might favor the more linear setting. When the conditions are dry and fast, or when bigger impacts are in play (jumps for instance), then the progressive mode is ideal. With the NUDE TR Evol, choosing and changing is easy. Key Features - Ransom Carbon HMX Frame - FOX 36 Float Factory 170mm Fork - FOX Nude TR EVOL, TwinLoc, 170mm - SRAM X01 Eagle 12-Speed - Shimano XT 4 Piston Disc Brakes - Syncros Revelstoke 1.5 TR Wheels - Maxxis Minion DHF Kevlar Tires - FOX Dropper Post, Syncros CF Parts
Scott Scale 920
$2,399.99
The SCOTT Scale 920 has geometry inspired by racing at the highest level. A SRAM Eagle drivetrain and Syncros components combine to give you a hardtail that is just itching to finish first. ICCR Cable Routing ICCR provides a clean look and a functional solution for all the different control cable standards on the market. Cable routing is fully internal and designed for full-length cable housing. Routing the cables internally omits bulky external hardware and looks cleaner. The cables can endure a longer lifetime as they are protected within the frame. The entry points are machined alloy removable inserts that come along with the frame and can be chosen according to the setup of the bike. Assembling an electronic group or a dropper post will not be a problem and the look will always be clean-cut. SW Dropouts We’ve redesigned all the parts that can give us significant benefits in terms of performance and functionality. The new dropouts are designed to be integrated on the thru-axle system thanks to a hollow tubular design that allows a simple and lightweight structure. Available for SRAM and Shimano DM derailleurs, this dropout increases stiffness and avoids damage to the frame in case of impacts on the rear derailleur. 29-Inch Wheels Improved roll-over is the most noticeable attribute when it comes to 29” wheels. The big wheels are great for rolling over nasty roots and rocky sections, essentially making it easier to ride these conditions. Improved traction is also a key factor with the increased wheel diameter compared to 27.5” wheels as tire contact to the ground is larger. - Scale Carbon HMF Frame - FOX 32 SC Performance 100mm Fork w/RideLoc 3-Position Remote - SRAM GX Eagle 12 Speed Drivetrain - Shimano Deore Hydraulic Disc Brakes - Syncros X-25 TR Rims - WTB Ranger 29 x 2.25" Kevlar Tires
Scott Scale 940
$1,599.99
The SCOTT Scale 940 features an ultralight Carbon Frame. RockShox suspension, a SRAM Eagle drivetrain, and Syncros components create a durable and affordable hardtail designed for world-class speed. ICCR Cable Routing ICCR provides a clean look and a functional solution for all the different control cable standards on the market. Cable routing is fully internal and designed for full-length cable housing. Routing the cables internally omits bulky external hardware and looks cleaner. The cables can endure a longer lifetime as they are protected within the frame. The entry points are machined alloy removable inserts that come along with the frame and can be chosen according to the setup of the bike. Assembling an electronic group or a dropper post will not be a problem and the look will always be clean-cut. SW Dropouts We’ve redesigned all the parts that can give us significant benefits in terms of performance and functionality. The new dropouts are designed to be integrated on the thru-axle system thanks to a hollow tubular design that allows a simple and lightweight structure. Available for SRAM and Shimano DM derailleurs, this dropout increases stiffness and avoids damage to the frame in case of impacts on the rear derailleur. 29-Inch Wheels Improved roll-over is the most noticeable attribute when it comes to 29” wheels. The big wheels are great for rolling over nasty roots and rocky sections, essentially making it easier to ride these conditions. Improved traction is also a key factor with the increased wheel diameter compared to 27.5” wheels as tire contact to the ground is larger. - Scale Carbon HMF Frame - RockShox Judy 100mm Fork w/RideLoc 2-Position Remote - SRAM SX Eagle 12 Speed Drivetrain - Shimano MT200 Hydraulic Disc Brakes - Syncros X-25 Rims - WTB Ranger 29 x 2.25" Tires
Scott Spark 900 Ultimate AXS
$8,999.99
The Spark 900 RC Team features a slew of high-end components in an affordable package. Our TwinLoc Suspension System, a 12-speed SRAM Eagle drivetrain, Shimano brakes and Syncros components combine to create a dream-worthy carbon full-suspension race bike. Evo-Lap Technology - With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up. - With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. - With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we’ve optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without a sacrifice in the stiffness, comfort or impact resistance. The entire range benefitted from our EvoLap technology. ICCR Cable Routing - On the Scale, Spark, Genius and Ransom, to provide a clean look and a functional solution for all the different control cable standards on the market, cable routing is fully internal and designed for full-length cable housing. Routing the cables internally omits bulky external hardware and looks cleaner. The cables can endure a longer lifetime as they are protected within the frame. The entry points are machined alloy removable inserts that come along with the frame and can be chosen according to the setup of the bike. Assembling an electronic group or a dropper post will not be a problem and the look will always be clean-cut. SW Dropouts - On the Scale, Spark, Genius, Ransom and Gambler we’ve redesigned all the parts that can give us significant benefits in terms of performance and functionality. On the previous model the support of the dropout was a bulky additional part molded to the carbon chain stay. The new dropouts are designed to be integrated on the thru-axle system thanks to a hollow tubular design that allows a simple and light weight structure. Available for SRAM and Shimano DM derailleurs, this dropout increases the stiffness and avoids damage to the frame in case of impacts on the rear derailleur. TwinLoc Suspension System - With TwinLoc, a rider can effectively control the complete frame, fork, and shock as a system. Why does this matter? A bike with 150mm of suspension travel, correctly set up, has more sag than a bike with 130mm. It's that extra travel that makes it more fun to ride and more capable on the descents, but the greater sag has an oversized effect on the bike's geometry and climbing performance. That's where TwinLoc matters. - TwinLoc helps manage the sag effect in several ways. Whereas most systems only increase low-speed compression in an effort to gain pedaling efficiency, TwinLoc allows us to not only change compression damping, but also to change the spring curve, dynamically altering the geometry of the bike. In Trail mode, the shock is not only firmer, but it has dynamically less travel. The bike sits higher, maintains a steep seat angle for those climbs, and becomes more agile. We also offer a third, full lockout mode for going up in the most efficient manner possible. - These unique settings optimize climbing geometry, even on longer travel bikes. We can eliminate the "long travel effect" that can rob your pedaling efficiency, but we're not robbing you of the full-fun, 150m travel when you point it downhill. From a race setting, to a lunch ride, to an after work trail shred, being able to switch from mode to mode depending on a trails profile at the push of a lever is paramount to riding faster and having a damned good time. Key Features - Spark RC Carbon HMF Frame - RockShox SID Select+RL3 100mm Fork - FOX Nude EVOL, TwinLoc Susp. System - SRAM GX Eagle 12 Speed - Shimano SLX Disc Brakes - Syncros Silverton 2.5 TR Wheels - Maxxis Rekon Race Kevlar Tires - Syncros Parts
Scott Spark RC 900 Team
$3,999.99
The Spark 900 RC Team features a slew of high-end components in an affordable package. Our TwinLoc Suspension System, a 12-speed SRAM Eagle drivetrain, Shimano brakes and Syncros components combine to create a dream-worthy carbon full-suspension race bike. Evo-Lap Technology - With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up. - With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. - With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we’ve optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without a sacrifice in the stiffness, comfort or impact resistance. The entire range benefitted from our EvoLap technology. ICCR Cable Routing - On the Scale, Spark, Genius and Ransom, to provide a clean look and a functional solution for all the different control cable standards on the market, cable routing is fully internal and designed for full-length cable housing. Routing the cables internally omits bulky external hardware and looks cleaner. The cables can endure a longer lifetime as they are protected within the frame. The entry points are machined alloy removable inserts that come along with the frame and can be chosen according to the setup of the bike. Assembling an electronic group or a dropper post will not be a problem and the look will always be clean-cut. SW Dropouts - On the Scale, Spark, Genius, Ransom and Gambler we’ve redesigned all the parts that can give us significant benefits in terms of performance and functionality. On the previous model the support of the dropout was a bulky additional part molded to the carbon chain stay. The new dropouts are designed to be integrated on the thru-axle system thanks to a hollow tubular design that allows a simple and light weight structure. Available for SRAM and Shimano DM derailleurs, this dropout increases the stiffness and avoids damage to the frame in case of impacts on the rear derailleur. Asymmetric Design - The Spark down tube shock and linkage are clearly asymmetric, when looking from the top of the bike. Carbon fibers achieve their full potential when used in smooth straight lines. Off-setting the shock slightly to the left hand side of the bike gives a clean and continuous structure from the down tube through the shock mount to the main pivot. TwinLoc Suspension System - With TwinLoc, a rider can effectively control the complete frame, fork, and shock as a system. Why does this matter? A bike with 150mm of suspension travel, correctly set up, has more sag than a bike with 130mm. It's that extra travel that makes it more fun to ride and more capable on the descents, but the greater sag has an oversized effect on the bike's geometry and climbing performance. That's where TwinLoc matters. - TwinLoc helps manage the sag effect in several ways. Whereas most systems only increase low-speed compression in an effort to gain pedaling efficiency, TwinLoc allows us to not only change compression damping, but also to change the spring curve, dynamically altering the geometry of the bike. In Trail mode, the shock is not only firmer, but it has dynamically less travel. The bike sits higher, maintains a steep seat angle for those climbs, and becomes more agile. We also offer a third, full lockout mode for going up in the most efficient manner possible. - These unique settings optimize climbing geometry, even on longer travel bikes. We can eliminate the "long travel effect" that can rob your pedaling efficiency, but we're not robbing you of the full-fun, 150m travel when you point it downhill. From a race setting, to a lunch ride, to an after work trail shred, being able to switch from mode to mode depending on a trails profile at the push of a lever is paramount to riding faster and having a damned good time. Key Features - Spark RC Carbon HMF Frame - RockShox SID Select+RL3 100mm Fork - FOX Nude EVOL, TwinLoc Susp. System - SRAM GX Eagle 12 Speed - Shimano SLX Disc Brakes - Syncros Silverton 2.5 TR Wheels - Maxxis Rekon Race Kevlar Tires - Syncros Parts
Scott Scale RC 900 Pro
$3,999.99
What is Pro? Is it one of the World's lightest Carbon frames? Is it top-of-the-line componentry fit for racing at the world's highest level? Is it the confidence that a racing mastercraft brings out in a racer? Yes, that is pro. That and the Scale RC 900 Pro, your secret weapon for the season to come. ICCR Cable Routing ICCR provides a clean look and a functional solution for all the different control cable standards on the market. Cable routing is fully internal and designed for full-length cable housing. Routing the cables internally omits bulky external hardware and looks cleaner. The cables can endure a longer lifetime as they are protected within the frame. The entry points are machined alloy removable inserts that come along with the frame and can be chosen according to the setup of the bike. Assembling an electronic group or a dropper post will not be a problem and the look will always be clean-cut. SW Dropouts We’ve redesigned all the parts that can give us significant benefits in terms of performance and functionality. The new dropouts are designed to be integrated on the thru-axle system thanks to a hollow tubular design that allows a simple and lightweight structure. Available for SRAM and Shimano DM derailleurs, this dropout increases stiffness and avoids damage to the frame in case of impacts on the rear derailleur. Axle Tool Working together with DT Swiss, we completely revisited the shape of the thru-axle lever to make it more ergonomic and to perfectly fit our frame. Additionally, we introduce a new multifunctional tool integrated into the inner part of the thru-axle itself. This 25T Torx wrench is easy to reach and ready to be used for quick adjustments on the trails. 29-Inch Wheels Improved roll-over is the most noticeable attribute when it comes to 29” wheels. The big wheels are great for rolling over nasty roots and rocky sections, essentially making it easier to ride these conditions. Improved traction is also a key factor with the increased wheel diameter compared to 27.5” wheels as tire contact to the ground is larger. - Scale RC Carbon HMF Frame - RockShox SID Select RL 100mm Fork w/RideLoc 2-Position Remote - Shimano XTR 12 Speed Drivetrain - Shimano XTR Hydraulic Disc Brakes - Syncros Silverton 1.5 TR Wheels - WTB Ranger 29 x 2.25" Kevlar Tires - Syncros Carbon Components
Kona Honzo ST
$2,299.00
Deciding which Kona is our favorite is like picking your favorite child. Everyone has one, but we don’t really speak about it. Hint, hint…we love the Honzo ST. We’ve built the bike to be gearless and fearless with modular dropouts, so you can go full custom, or run it as we spec it, with a 120mm RockShox Revelation RC fork, SRAM NX 1x11 speed drivetrain, and SRAM Level T brakes - Kona chromoly steel frame w/ adjustable dropouts - RockShox Revelation RC DebonAir Motion Control 120mm fork - SRAM NX 1x11 drivetrain - WTB ST i29 29" TCS rims w/Maxxis DHF 29x2.3" tires - SRAM Level T hydraulic disc brakes - Trans-X dropper post
Scott Ransom 920
$3,799.99
The Ransom. 170mm of trail-munchin', climb-crushing, stage-winning, all-day-pinning mountain biking excellence. The 920 comes equipped with our TwinLoc Suspension System, a SRAM Eagle groupset and Syncros components to help you get away with murder, regardless of your ability level. Ransom Geometry - When designing the Ransom, speed was a topic that was always at the forefront of discussion. Naturally, the geometry of the bike was selected to accompany the type of riding it is intended for. With 170mm of travel, this unique 29er has a geometry that will get you to the top comfortably and then back down faster than ever before. Long, slack and stable at speed, this rig can tame any descent. However, we didn't want to cut any corners with regards to seat angle or position. Where we live, big days involve plenty of climbing, and we think it's important that climbs can be as fun as the downs – proper climbing position is essential to that. Ransom Protection - Protecting the Ransom's frame was an integral part of the project. We've integrated a clever DT protector under the BB and along the downtube, and have also implemented a newly developed, noise-silencing chainstay/seatstay protector. A quiet ride is a fast ride. TwinLoc Suspension - With TwinLoc, a rider can effectively control the complete frame, fork, and shock as a system. Why does this matter? A bike with 150mm of suspension travel, correctly set up, has more sag than a bike with 130mm. It's that extra travel that makes it more fun to ride and more capable on the descents, but the greater sag has an oversized effect on the bike's geometry and climbing performance. That's where TwinLoc matters. - TwinLoc helps manage the sag effect in several ways. Whereas most systems only increase low-speed compression in an effort to gain pedaling efficiency, TwinLoc allows us to not only change compression damping, but also to change the spring curve, dynamically altering the geometry of the bike. In Trail mode, the shock is not only firmer, but it has dynamically less travel. The bike sits higher, maintains a steep seat angle for those climbs, and becomes more agile. We also offer a third, full lockout mode for going up in the most efficient manner possible. - These unique settings optimize climbing geometry, even on longer travel bikes. We can eliminate the "long travel effect" that can rob your pedaling efficiency, but we're not robbing you of the full-fun, 150mm travel when you point it downhill. From a race setting, to a lunch ride, to an after work trail shred, being able to switch from mode to mode depending on a trails profile at the push of a lever is paramount to riding faster and having a damned good time. One Frame Two Wheel Sizes - With our mountain bikes, we try to achieve ultimate versatility. These specific models can switch from 27.5" to 29" wheels with nothing more than the flip of a chip. No need to change the fork, all you need to do is flip a shock mount chip, change your wheels and off you go. The flip chip allows us to maintain a similar BB height when switching from one wheel size to the other which is key to keeping handling similar for both wheel sizes. With 27.5" wheels, you can run either 2.5", 2.6" or 2.8" tires. For the 29er, anywhere from 2.4"-2.6" is good to go. 29" Wheels - Improved roll-over is the most noticeable attribute when it comes to 29” wheels. The big wheels are great for rolling over nasty roots and rocky sections, essentially making it easier to ride these conditions. Improved traction is also a key factor with the increased wheel diameter compared to 27.5” wheels as tire contact to the ground is larger. - Best Roll-Over Performance - Carries Momentum - Maximum Traction surface - Best stability on easy trails - Lowest suspension stress - Great for larger frame sizes - Increase stability on long curve Key Features - Ransom Alloy SL Frame - FOX 36 Float Performance 170mm Fork - FOX Nude T EVOL, TwinLoc, 170mm - SRAM NX Eagle 12 Speed - Shimano 4 Piston Disc Brakes - Syncros Revelstoke 2.5 TR Wheels - Maxxis Minion DHF Kevlar Tires - Syncros Dropper Post and Parts
Scott Spark RC 900 World Cup
$5,999.99
The Spark RC 900 World Cup is a cross-country full-suspension bike on a mission to win. Keeping the ride smooth, a RockShox SID Select+ fork is paired with a custom RockShox NUDE 3-mode rear shock via our TwinLoc Suspension System. The SRAM X01 Eagle 12-speed drivetrain will move you up the trail and SRAM Level disc brakes will slow you down when it's time to step onto the podium. Evo-Lap Technology - With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up. - With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. - With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we’ve optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without a sacrifice in the stiffness, comfort or impact resistance. The entire range benefitted from our EvoLap technology. ICCR Cable Routing - On the Scale, Spark, Genius and Ransom, to provide a clean look and a functional solution for all the different control cable standards on the market, cable routing is fully internal and designed for full-length cable housing. Routing the cables internally omits bulky external hardware and looks cleaner. The cables can endure a longer lifetime as they are protected within the frame. The entry points are machined alloy removable inserts that come along with the frame and can be chosen according to the setup of the bike. Assembling an electronic group or a dropper post will not be a problem and the look will always be clean-cut. Key Features - Spark RC Carbon HMX Frame - RockShox SID Select+RL3 100mm Fork - RS Nude RL3, 100mm TwinLoc - SRAM X01 Eagle 12 Speed - SRAM Level TLM Disc Brakes - Syncros Silverton 1.0 Carbon Wheels - Maxxis Rekon Race Kevlar Tires - Syncros Carbon Parts
Salsa Horsethief Carbon XTR
$7,099.00
This is it: one of the finest, most versatile trail bikes anyone’s ever thrown a leg over. The 140mm of front suspension and 120mm of travel out back mean you can point the Horsethief Carbon XTR down just about any trail and roll with confidence. The Split Pivot rear suspension system all but eliminates brake chatter and pedal bob. The Shimano XTR group delivers incredibly light and precise shifts and the stopping power of four-piston brakes. The Reynolds C-Series carbon wheelset makes an agile bike even more fun. The flip chip and compatibility with 29" or 27.5 plus wheels add a layer of versatility to the whole package. Horsethief is the trail bike that prompts you to ride more: more miles, more terrain, more boldly.
Salsa Spearfish SX Eagle
$2,649.00
This is a no-nonsense bike: everything you need, nothing you don’t. The 6066-T6 aluminum frame makes for a light and stiff platform well-suited to long efforts. SRAM’s 12-speed SX drivetrain keeps you moving efficiently with plenty of gear range. The 100mm of Split Pivot rear suspension and 120mm fork are game for all-day rides on technical terrain and will keep you in the zone as long as you need. Put it all together and you’ve got a machine purpose-built for going fast with less fatigue. Spearfish will always push you farther, faster, harder.
Salsa Spearfish Carbon XT
$5,399.00
Faster, farther, more efficient—that’s the ethos of Spearfish Carbon XT. The stiff, lightweight carbon frame translates more of your pedal power into propulsion, and the Split Pivot suspension design provides supreme pedaling efficiency and traction. A Fox Float 34 SC Performance Elite Fit4 fork delivers 120mm of front suspension travel to soak up the trail. A Fox Float DPS Performance Elite shock grants 100mm of travel in the rear. Shimano’s XT groupset puts consistent shifting and braking performance at your fingertips. Spearfish Carbon XT is the perfect choice when precision and speed are paramount.
Scott Spark 940
$3,399.99
The SCOTT Spark 940 has a super light Alloy frame. It features a custom FOX Nude Shock, Shimano 12-speed drivetrain and our TwinLoc Suspension System to always optimize your ride. It's lightweight, durable, affordable and retains all the great geometry and ride of its Carbon cousins. Asymmetetric Design - The Spark down tube shock and linkage are clearly asymmetric, when looking from the top of the bike. Carbon fibers achieve their full potential when used in smooth straight lines. Off setting the shock slightly to the left hand side of the bike gives a clean and continuous structure from the down tube through the shock mount to the main pivot. TwinLoc Suspension System - With TwinLoc, a rider can effectively control the complete frame, fork, and shock as a system. Why does this matter? A bike with 150mm of suspension travel, correctly set up, has more sag than a bike with 130mm. It's that extra travel that makes it more fun to ride and more capable on the descents, but the greater sag has an oversized effect on the bike's geometry and climbing performance. That's where TwinLoc matters. - TwinLoc helps manage the sag effect in several ways. Whereas most systems only increase low-speed compression in an effort to gain pedaling efficiency, TwinLoc allows us to not only change compression damping, but also to change the spring curve, dynamically altering the geometry of the bike. In Trail mode, the shock is not only firmer, but it has dynamically less travel. The bike sits higher, maintains a steep seat angle for those climbs, and becomes more agile. We also offer a third, full lockout mode for going up in the most efficient manner possible. - These unique settings optimize climbing geometry, even on longer travel bikes. We can eliminate the "long travel effect" that can rob your pedaling efficiency, but we're not robbing you of the full-fun, 150m travel when you point it downhill. From a race setting, to a lunch ride, to an after work trail shred, being able to switch from mode to mode depending on a trails profile at the push of a lever is paramount to riding faster and having a damned good time. 29" Wheels - Improved roll-over is the most noticeable attribute when it comes to 29” wheels. The big wheels are great for rolling over nasty roots and rocky sections, essentially making it easier to ride these conditions. Improved traction is also a key factor with the increased wheel diameter compared to 27.5” wheels as tire contact to the ground is larger. KEY FEATURES - Spark Alloy SL Frame - FOX 34 Float Rhythm 120mm Fork - FOX Nude EVOL, 120mm, TwinLoc - Shimano XT-SLX 12 Speed - Shimano SLX Disc Brakes - Syncros Silverton 2.5 TR Wheels - Maxxis Rekon Kevlar Tires - Syncros Dropper Post and Parts
Salsa Spearfish Carbon GX Eagle
$5,199.00
Spearfish is built to crush endurance-testing terrain while thriving on technical climbs and descents. With thoroughly modern geometry and a highly adaptable suspension platform, the Spearfish chases XC and distance efforts, keeping you at the front of the pack. - Spearfish Carbon frame and RockShox Deluxe RT3 shock - RockShox SID RLC 120mm fork - SRAM GX Eagle 1x12 drivetrain - SRAM Guide R hydraulic disc brakes - WTB ST i25 TCS wheelset - Reverb Stealth dropper seatpost
Salsa Spearfish SX Eagle
$2,649.00
Spearfish SX Eagle is an aluminum full-suspension bike with finesse. The RockShox Recon RL fork delivers 120mm of trail-taming travel up front, while the RockShox Deluxe Select+ shock provides 100mm of plush rear travel. Spearfish offers excellent traction and pedaling efficiency thanks to its Split Pivot suspension design. SRAM’s SX Eagle drivetrain is a dependable performer, and the Shimano brakes scrub speed effectively and consistently to keep you from overcooking corners. Spearfish SX Eagle is the aluminum full-suspension bike for XC efforts, ultra-endurance events, or casual trail fun.
Salsa Spearfish SLX
$2,799.00
Spearfish is built to crush endurance-testing terrain while thriving on technical climbs and descents. With thoroughly modern geometry and a highly adaptable suspension platform, the Spearfish chases XC and distance efforts, keeping you at the front of the pack. - Spearfish Aluminum frame and RockShox Deluxe RT shock - RockShox Recon RL 120mm fork - Shimano SLX/Race Face Ride 1x11 drivetrain - Shimano hydraulic disc brakes - WTB ST i25 TCS wheelset - TranzX dropper seatpost
Kona Shield
$1,599.00
The Shield is more than just a patrol bike. It’s a partner in the field, on the streets, and in situations where you need reliable transportation. Use it as a shield, use it as a ladder, use it as a utility tool for whatever the situation merits. The integrated rack is rated to carry up to 200lbs so you can haul gear, VIPs, or whatever cargo is needed. We’ve designed the frame geometry for a comfortable ride, while also making it simple to dismount the bike quickly when necessary. The component spec is a modern and reliable selection that provides easy shifting, strong stopping power, and longevity of parts, ensuring minimal maintenance so you can keep rolling. We’ve updated the graphics to reflect requests from law enforcement and built a sturdy, stealthy bike that is up for any urban challenge.
Scott Aspect 950
$599.99
The SCOTT Aspect 950 is a mountain hardtail that is designed to be light, efficient, and reasonably priced. Featuring disc brakes and Syncros components, this is the perfect bike for the novice or budget-conscious mountain biker. Improved roll-over is the most noticeable attribute when it comes to 29-inch wheels. The big wheels are great for rolling over nasty roots and rocky sections, essentially making it easier to ride these conditions. Improved traction is also a key factor with the increased wheel diameter compared to 27.5-inch wheels, as tire contact to the ground is larger. Key Features - Aspect 900 Alloy Frame - Suntour XCT30-HLO 100mm Fork - Shimano Altus 27 Speed - Tektro Hydraulic Disc Brakes - Kenda Booster
Kona Process 134 DL 29
$3,699.00
With all the bang for a little less buck, the Process 134 DL 29 has the bells and whistles to make this bike sing. A RockShox Pike Select fork and highly tunable RockShox Deluxe Ultimate trunnion mounted shock keep the ride plush and playful, while a SRAM GX/NX Eagle drivetrain makes the climbs a breeze! Paired with our legendary Process geometry, the 134 DL 29 is perfect anytime, anywhere! - Kona 6061 Aluminum Butted frame - RockShox Pike Select RC Charger DebonAir 140mm fork - RockShox Deluxe Ultimate Trunnion shock - SRAM GX/NX Eagle 1x12 drivetrain - WTB KOM Light i30 TCS rims w/Maxxis Minion DHF tires - SRAM Guide R hydraulic disc brakes
Scott Spark RC 900 Team Issue AXS
$4,999.99
With the Spark RC Team Issue AXS, take your World Championship dreams and start making them a reality. The fastest frame on the market, a wireless SRAM 12-speed groupset and Syncros components combine to give you the perfect tool for the job, whether you're racing a local weekend race or toeing it up for your first World Cup. Evo-Lap Technology - With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA(finite element analysis) software, to map out the carbon lay-up. - With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. - With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we’ve optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without a sacrifice in the stiffness, comfort or impact resistance. The entire range benefitted from our EvoLap technology. ICCR Cable Routing - On the Scale, Spark, Genius and Ransom, to provide a clean look and a functional solution for all the different control cable standards on the market, cable routing is fully internal and designed for full length cable housing. Routing the cables internally omits bulky external hardware and looks cleaner. The cables can endure a longer lifetime as they are protected within the frame. The entry points are machined alloy removable inserts that come along with the frame and can be chosen according to the setup of the bike. Assembling an electronic group or a dropper post will not be a problem and the look will always be clean-cut. SW Dropouts - On the Scale, Spark, Genius, Ransom and Gambler we’ve redesigned all the parts that can give us significant benefits in terms of performance and functionality. On the previous model the support of the dropout was a bulky additional part molded to the carbon chain stay. The new dropouts are designed to be integrated on the thru-axle system thanks to a hollow tubular design that allows a simple and light weight structure. Available for SRAM and Shimano DM derailleurs, this dropout increases the stiffness and avoids damage to the frame in case of impacts on the rear derailleur. TwinLoc Suspension System - With TwinLoc, a rider can effectively control the complete frame, fork, and shock as a system. Why does this matter? A bike with 150mm of suspension travel, correctly set up, has more sag than a bike with 130mm. It's that extra travel that makes it more fun to ride and more capable on the descents, but the greater sag has an oversized effect on the bike's geometry and climbing performance. That's where TwinLoc matters. - TwinLoc helps manage the sag effect in several ways. Whereas most systems only increase low-speed compression in an effort to gain pedaling efficiency, TwinLoc allows us to not only change compression damping, but also to change the spring curve, dynamically altering the geometry of the bike. In Trail mode, the shock is not only firmer, but it has dynamically less travel. The bike sits higher, maintains a steep seat angle for those climbs, and becomes more agile. We also offer a third, full lockout mode for going up in the most efficient manner possible. - These unique settings optimize climbing geometry, even on longer travel bikes. We can eliminate the "long travel effect" that can rob your pedaling efficiency, but we're not robbing you of the full-fun, 150m travel when you point it downhill. From a race setting, to a lunch ride, to an after work trail shred, being able to switch from mode to mode depending on a trails profile at the push of a lever is paramount to riding faster and having a damned good time. Key Features - Spark RC Carbon HMF Frame - RockShox SID Select+RL3 100mm Fork - FOX Nude EVOL, 100mm, TwinLoc - SRAM X01 AXS Eagle 12 Speed - Shimano XT Disc Brakes - Syncros Silverton 2.0 TR Wheels - Maxxis Rekon Race Kevlar Tires - Syncros Carbon Parts
Kona Hei Hei
$2,599.00
Decades of cross-country racing and punishing rides have helped us refine our long-standing XC race bike. The Hei Hei features updated geometry for a more comfortable ride, a shorter stem length, a 120mm travel RockShox Revelation RC fork, a SRAM NX/GX Eagle 12-speed drivetrain, more powerful Shimano brakes, and deep dropper post insertion. - Kona Race Light 6061 Aluminum Butted frame - RockShox Revelation RC DebonAir 120mm fork - RockShox Monarch RL Solo Air shock - SRAM GX/NX Eagle 1x12 drivetrain - Shimano hydraulic disc brakes - WTB ST i27 TCS 29" rims w/Maxxis Rekon EXO TR DUAL 29 x 2.25" tires - Trans-X dropper post
Scott Scale 930
$1,799.99
The SCOTT Scale 930 boasts a super light Carbon Fiber frame. FOX suspension, a SRAM Eagle drivetrain and Syncros components combine to create a lightweight and efficient racing machine. ICCR Cable Routing ICCR provides a clean look and a functional solution for all the different control cable standards on the market. Cable routing is fully internal and designed for full-length cable housing. Routing the cables internally omits bulky external hardware and looks cleaner. The cables can endure a longer lifetime as they are protected within the frame. The entry points are machined alloy removable inserts that come along with the frame and can be chosen according to the setup of the bike. Assembling an electronic group or a dropper post will not be a problem and the look will always be clean-cut. SW Dropouts We’ve redesigned all the parts that can give us significant benefits in terms of performance and functionality. The new dropouts are designed to be integrated on the thru-axle system thanks to a hollow tubular design that allows a simple and lightweight structure. Available for SRAM and Shimano DM derailleurs, this dropout increases stiffness and avoids damage to the frame in case of impacts on the rear derailleur. 29-Inch Wheels Improved roll-over is the most noticeable attribute when it comes to 29” wheels. The big wheels are great for rolling over nasty roots and rocky sections, essentially making it easier to ride these conditions. Improved traction is also a key factor with the increased wheel diameter compared to 27.5” wheels as tire contact to the ground is larger. - Scale Carbon HMF Frame - FOX 32 Float Rhythm 100mm Fork w/RideLoc 3-Position Remote - SRAM SX Eagle 12 Speed Drivetrain - Shimano MT401 Hydraulic Disc Brakes - Syncros X-25 TR Rims - WTB Ranger 29 x 2.25" Kevlar Tires
Scott Scale 950
$1,699.99
The SCOTT Scale 950 features an ultralight Alloy Frame. FOX suspension, a Shimano 12-speed drivetrain and Syncros components create a durable and affordable hardtail designed for world-class speed. Syncros wheels and Maxxis Rekon Race tires yield a sturdy footing with plenty of trail-gripping tread, perfect for your next off-road outing. - Scale Alloy 6061 Boost Frame - FOX 32 Float Rhythm 100mm Fork - Shimano XT/SLX 12 Speed - Shimano MT-501 Hydraulic Disc Brakes - Syncros Rims - Maxxis Rekon Race Kevlar 29 x 2.25" Tires
Scott Scale 910
$2,799.99
The SCOTT Scale 910 has geometry inspired by racing at the highest level, a Shimano XT 12-speed drivetrain and Syncros components combine to give you a hard tail that is just itching to finish first. ICCR Cable Routing ICCR provides a clean look and a functional solution for all the different control cable standards on the market. Cable routing is fully internal and designed for full-length cable housing. Routing the cables internally omits bulky external hardware and looks cleaner. The cables can endure a longer lifetime as they are protected within the frame. The entry points are machined alloy removable inserts that come along with the frame and can be chosen according to the setup of the bike. Assembling an electronic group or a dropper post will not be a problem and the look will always be clean-cut. SW Dropouts We’ve redesigned all the parts that can give us significant benefits in terms of performance and functionality. The new dropouts are designed to be integrated on the thru-axle system thanks to a hollow tubular design that allows a simple and lightweight structure. Available for SRAM and Shimano DM derailleurs, this dropout increases stiffness and avoids damage to the frame in case of impacts on the rear derailleur. Axle Tool Working together with DT Swiss, we completely revisited the shape of the thru-axle lever to make it more ergonomic and to perfectly fit our frame. Additionally, we introduce a new multifunctional tool integrated into the inner part of the thru-axle itself. This 25T Torx wrench is easy to reach and ready to be used for quick adjustments on the trails. 29-Inch Wheels Improved roll-over is the most noticeable attribute when it comes to 29” wheels. The big wheels are great for rolling over nasty roots and rocky sections, essentially making it easier to ride these conditions. Improved traction is also a key factor with the increased wheel diameter compared to 27.5” wheels as tire contact to the ground is larger. - Scale Carbon HMF Frame - FOX 32 SC Performance 100mm Fork w/RideLoc 3-Position Remote - Shimano XT 12 Speed Drivetrain - Shimano XT Hydraulic Disc Brakes - Syncros Silverton 2.5 TR Wheels - WTB Ranger 29 x 2.25" Kevlar Tires
Scott Ransom 910
$5,499.99
The Ransom. 170mm of trail-munchin', climb-crushing, stage-winning, all-day-pinning, mountain biking excellence. The 910 comes equipped with our TwinLoc Suspension System, a SRAM Eagle groupset and Syncros components to help you get away with murder, regardless of your ability level. Evo-Lap Technology - With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up. - With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. - With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we’ve optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super-light and compact frame without a sacrifice in the stiffness, comfort or impact resistance. The entire range benefited from our EvoLap technology. ICCR Cable Routing - On the Scale, Spark, Genius and Ransom, to provide a clean look and a functional solution for all the different control cable standards on the market, cable routing is fully internal and designed for full-length cable housing. Routing the cables internally omits bulky external hardware and looks cleaner. The cables can endure a longer lifetime as they are protected within the frame. The entry points are machined alloy removable inserts that come along with the frame and can be chosen according to the setup of the bike. Assembling an electronic group or a dropper post will not be a problem and the look will always be clean-cut. SW Dropouts - On the Scale, Spark, Genius, Ransom and Gambler we’ve redesigned all the parts that can give us significant benefits in terms of performance and functionality. On the previous model, the support of the dropout was a bulky additional part molded to the carbon chain stay. The new dropouts are designed to be integrated on the thru-axle system thanks to a hollow tubular design that allows a simple and light weight structure. Available for SRAM and Shimano DM derailleurs, this dropout increases the stiffness and avoids damage to the frame in case of impacts on the rear derailleur. Ransom Carbon Construction - While we always aim to have lightweight carbon bikes here at SCOTT, we never compromise frame strength when doing so. Taking into consideration the riding this bike is designed for, we have created our strongest carbon frame to date. Through clever layering and reinforcement in certain zones we obtain the stiffness wanted between the head tube and the rear wheel axle via a path following the downtube and the chainstays - we call this the stiffness backbone. The Ransom being a 1x only bike allowed us to optimize the width of the main pivot which is normally the weak point on this stiffness path. Additionally, the Trunnion mount on the DT close to the BB allows us to obtain great stiffness at the bottom of the bike and lightweight construction up top for compliance and for having the center of gravity as low as possible. Fox Nude TR Shock - On several Ransom and Genius models, you'll find the all new FOX NUDE TR EVOL. What the TR allows you to do is to select what sort of progression you would like in Descend mode: more linear, or more progressive. By flipping the Ramp Adjust Lever, you can decide how your shock behaves while descending. - A more linear shock gives a rider the same amount of support throughout a shock's travel. The suspension is supple throughout, and is "easier" to reach the end of the travel, or "bottom out." A more progressive shock will offer more support towards the end of travel, and is harder to bottom out. - These settings are really linked to riding speed. When it is wet, techy, or when impacts are small and riding tends to be slower, one might favor the more linear setting. When the conditions are dry and fast, or when bigger impacts are in play (jumps for instance), then the progressive mode is ideal. With the NUDE TR Evol, choosing and changing is easy. Key Features - Ransom Carbon HMX-Alloy Frame - FOX 36 Float Perf. Elite 170mm Fork - FOX Nude TR EVOL, TwinLoc, 170mm - SRAM GX Eagle 12 Speed - Shimano XT 4 Piston Disc Brakes - Syncros Revelstoke 2.0 TR Wheels - Maxxis Minion DHF Kevlar Tires - FOX Dropper Post, Syncros Parts
Salsa Cutthroat Apex 1
$2,499.00
Salsa’s Cutthroat is all about speed and comfort — full carbon frame and fork, Class 5 Vibration Reduction System, and racing-inspired geometry make for a quick bike that won’t leave you pummeled as you ride alongside a rising moon. The Cutthroat Apex 1 features a 1x11-speed drivetrain for a lightweight, wide gear range that is perfect for loaded climbing, while Hayes CX Expert mechanical disc brakes are easy to field-service and deliver ample power to control sketchy descents on variable surfaces. The Cutthroat accommodates multi-day packing needs with its extra-large front triangle for voluminous frame bags, hidden rear rack mounts, and room for 4 or 5 water bottles depending on frame size. Intelligent elements like internal dynamo cable routing in the fork and a top-tube bag direct mount add to the Cutthroat’s evolved design. And, with clearance for up to 2.4-inch tires along with all the mud you’re likely to encounter on your adventures, the Cutthroat's capability as an all-terrain pack horse that was born to run.