Filter By:

  • Show More Sizes
  • Show Fewer Sizes

Full-Suspension

Scott Contessa Genius 910
$3,599.99
The Contessa Genius was put on this earth to get you up mountains with ease and to get you back down them in a flash. The Contessa Genius 910 features our TwinLoc Suspension System to always optimize your ride. With a Shimano 12-speed drivetrain and Syncros components, the Contessa Genius 910 is action ready. Any Trail. Any Time. Fox Nude TR Shock - On several Ransom and Genius models, you'll find the all new FOX NUDE TR EVOL. What the TR allows you to do is to select what sort of progression you would like in Descend mode: more linear, or more progressive. By flipping the Ramp Adjust Lever, you can decide how your shock behaves while descending. - A more linear shock gives a rider the same amount of support throughout a shock's travel. The suspension is supple throughout, and is "easier" to reach the end of the travel, or "bottom out." A more progressive shock will offer more support towards the end of travel, and is harder to bottom out. These settings are really linked to riding speed. When it is wet, techy, or when impacts are small and riding tends to be slower, one might favor the more linear setting. When the conditions are dry and fast, or when bigger impacts are in play (jumps for instance), then the progressive mode is ideal. With the NUDE TR Evol, choosing and changing is easy. TwinLoc Suspension System - With TwinLoc, a rider can effectively control the complete frame, fork, and shock as a system. Why does this matter? A bike with 150mm of suspension travel, correctly set up, has more sag than a bike with 130mm. It's that extra travel that makes it more fun to ride and more capable on the descents, but the greater sag has an oversized effect on the bike's geometry and climbing performance. That's where TwinLoc matters. - TwinLoc helps manage the sag effect in several ways. Whereas most systems only increase low-speed compression in an effort to gain pedaling efficiency, TwinLoc allows us to not only change compression damping, but also to change the spring curve, dynamically altering the geometry of the bike. In Trail mode, the shock is not only firmer, but it has dynamically less travel. The bike sits higher, maintains a steep seat angle for those climbs, and becomes more agile. We also offer a third, full lockout mode for going up in the most efficient manner possible. - These unique settings optimize climbing geometry, even on longer travel bikes. We can eliminate the "long travel effect" that can rob your pedaling efficiency, but we're not robbing you of the full-fun, 150m travel when you point it downhill. From a race setting, to a lunch ride, to an after work trail shred, being able to switch from mode to mode depending on a trails profile at the push of a lever is paramount to riding faster and having a damned good time. One Frame Two Wheel Sizes With our mountain bikes, we try to achieve ultimate versatility. These specific models can switch from 27.5" to 29" wheels with nothing more than the flip of a chip. No need to change the fork, all you need to do is flip a shock mount chip, change your wheels and off you go. The flip chip allows us to maintain a similar BB height when switching from one wheel size to the other which is key to keeping handling similar for both wheel sizes. With 27.5" wheels, you can run either 2.5", 2.6" or 2.8" tires. For the 29er, anywhere from 2.4"-2.6" is good to go. Key Features - Genius Alloy SL Frame - FOX 34 Float Performance 150mm Fork - FOX Nude TR EVOL, TwinLoc, 150mm - Shimano XT-SLX 12 Speed - Shimano 4 Piston Disc Brakes - Syncros X-30S TR Rims - Maxxis Kevlar Tires - Syncros Dropper Post and Parts
Scott Contessa Ransom 910
$5,499.99
The Contessa Ransom. 170mm of trail munchin', climb crushing, stage winning all day pinning mountain biking excellence. The Contessa Ransom 910 comes equipped with our TwinLoc Suspension System, a SRAM Eagle groupset and Syncros components to help you get away with murder, regardless of your ability level. Evo-Lap Technology - With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA(finite element analysis) software, to map out the carbon lay-up. - With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. - With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we’ve optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without a sacrifice in the stiffness, comfort or impact resistance. The entire range benefited from our EvoLap technology. ICCR Cable Routing - On the Scale, Spark, Genius and Ransom, to provide a clean look and a functional solution for all the different control cable standards on the market, cable routing is fully internal and designed for full length cable housing. Routing the cables internally omits bulky external hardware and looks cleaner. The cables can endure a longer lifetime as they are protected within the frame. The entry points are machined alloy removable inserts that come along with the frame and can be chosen according to the setup of the bike. Assembling an electronic group or a dropper post will not be a problem and the look will always be clean-cut. Fox Nude TR Shock - On several Ransom and Genius models, you'll find the all new FOX NUDE TR EVOL. What the TR allows you to do is to select what sort of progression you would like in Descend mode: more linear, or more progressive. By flipping the Ramp Adjust Lever, you can decide how your shock behaves while descending. - A more linear shock gives a rider the same amount of support throughout a shock's travel. The suspension is supple throughout, and is "easier" to reach the end of the travel, or "bottom out." A more progressive shock will offer more support towards the end of travel, and is harder to bottom out. These settings are really linked to riding speed. When it is wet, techy, or when impacts are small and riding tends to be slower, one might favor the more linear setting. When the conditions are dry and fast, or when bigger impacts are in play (jumps for instance), then the progressive mode is ideal. With the NUDE TR Evol, choosing and changing is easy. Key Features - Ransom Carbon HMX-Alloy Frame - FOX 36 Float Perf. Elite 170mm Fork - FOX Nude TR EVOL, TwinLoc, 170mm - SRAM GX Eagle 12 Speed - Shimano XT 4 Piston Disc Brakes - Syncros Revelstoke 2.0 TR Wheels - Maxxis Minion DHF Kevlar Tires - FOX Dropper Post, Syncros Parts
Scott Contessa Spark 910
$3,999.99
The SCOTT Contessa Spark 910 boasts a super light HMF Carbon Fiber mainframe with an Alloy swing arm. Equipped with a custom FOX Nude shock, a SRAM Eagle drivetrain and our Patented TwinLoc Suspension System, in combination with Traction Control, allowing for three travel/geometry settings to always optimize your ride. It's the perfect partner for marathons, stage races, and all day fun. Evo-Lap Technology - With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA(finite element analysis) software, to map out the carbon lay-up. - With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. - With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we’ve optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without a sacrifice in the stiffness, comfort or impact resistance. The entire range benefited from our EvoLap technology. ICCR Cable Routing On the Scale, Spark, Genius and Ransom, to provide a clean look and a functional solution for all the different control cable standards on the market, cable routing is fully internal and designed for full length cable housing. Routing the cables internally omits bulky external hardware and looks cleaner. The cables can endure a longer lifetime as they are protected within the frame. The entry points are machined alloy removable inserts that come along with the frame and can be chosen according to the setup of the bike. Assembling an electronic group or a dropper post will not be a problem and the look will always be clean-cut. SW Dropouts On the Scale, Spark, Genius, Ransom and Gambler we’ve redesigned all the parts that can give us significant benefits in terms of performance and functionality. On the previous model the support of the dropout was a bulky additional part molded to the carbon chain stay. The new dropouts are designed to be integrated on the thru-axle system thanks to a hollow tubular design that allows a simple and light weight structure. Available for SRAM and Shimano DM derailleurs, this dropout increases the stiffness and avoids damage to the frame in case of impacts on the rear derailleur. Key Features - Spark Carbon HMF-Alloy Frame - FOX SC 34 Float Perf. 120mm Fork - FOX Nude EVOL, TwinLoc, 100mm - SRAM GX Eagle 12 Speed - Shimano SLX Disc Brakes - Syncros Silverton 2.5 TR Wheels - Maxxis Rekon Kevlar Tires - Syncros Dropper Post and Parts
Scott Contessa Spark 920
$2,899.99
The SCOTT Contessa Spark 920 has a super light Alloy frame, a SRAM Eagle Drivetrain, a FOX 32 Float Fork and a custom FOX Float EVOL Shock. Our Patented TwinLoc Suspension System, in combination with Traction Control, allows for three travel/geometry settings to always optimize your ride. Asymmetric Design The Spark down tube shock and linkage are clearly asymmetric, when looking from the top of the bike. Carbon fibers achieve their full potential when used in smooth straight lines. Off setting the shock slightly to the left hand side of the bike gives a clean and continuous structure from the down tube through the shock mount to the main pivot. 29" Wheels Improved roll-over is the most noticeable attribute when it comes to 29” wheels. The big wheels are great for rolling over nasty roots and rocky sections, essentially making it easier to ride these conditions. Improved traction is also a key factor with the increased wheel diameter compared to 27.5” wheels as tire contact to the ground is larger. - Best Roll-Over Performance - Carries Momentum - Maximum Traction surface - Best stability on easy trails - Lowest suspension stress - Great for larger frame sizes - Increase stability on long curve Key Features - Spark Alloy SL Frame - FOX 32 Float Rhythm 120mm Fork - FOX Float, TwinLoc, 100mm - SRAM NX Eagle 12 Speed - Shimano Disc Brakes - Syncros X-25 Rims - Maxxis Rekon Kevlar Tires - Syncros Dropper Post and Parts
Scott Contessa Spark 930
$2,099.99
The SCOTT Contessa Spark 930 has a super-light Alloy frame, as well as an X-Fusion NUDE shock with three modes. Throw in a SRAM Eagle Drivetrain and you've got a lightweight, durable and affordable bike that retains the great geometry and ride of its Carbon cousins. Asymmetric Design The Spark down tube shock and linkage are clearly asymmetric, when looking from the top of the bike. Carbon fibers achieve their full potential when used in smooth straight lines. Off setting the shock slightly to the left hand side of the bike gives a clean and continuous structure from the down tube through the shock mount to the main pivot. TwinLoc Suspension System - With TwinLoc, a rider can effectively control the complete frame, fork, and shock as a system. Why does this matter? A bike with 150mm of suspension travel, correctly set up, has more sag than a bike with 130mm. It's that extra travel that makes it more fun to ride and more capable on the descents, but the greater sag has an oversized effect on the bike's geometry and climbing performance. That's where TwinLoc matters. - TwinLoc helps manage the sag effect in several ways. Whereas most systems only increase low-speed compression in an effort to gain pedaling efficiency, TwinLoc allows us to not only change compression damping, but also to change the spring curve, dynamically altering the geometry of the bike. In Trail mode, the shock is not only firmer, but it has dynamically less travel. The bike sits higher, maintains a steep seat angle for those climbs, and becomes more agile. We also offer a third, full lockout mode for going up in the most efficient manner possible. - These unique settings optimize climbing geometry, even on longer travel bikes. We can eliminate the "long travel effect" that can rob your pedaling efficiency, but we're not robbing you of the full-fun, 150m travel when you point it downhill. From a race setting, to a lunch ride, to an after work trail shred, being able to switch from mode to mode depending on a trails profile at the push of a lever is paramount to riding faster and having a damned good time. 29" Wheels Improved roll-over is the most noticeable attribute when it comes to 29” wheels. The big wheels are great for rolling over nasty roots and rocky sections, essentially making it easier to ride these conditions. Improved traction is also a key factor with the increased wheel diameter compared to 27.5” wheels as tire contact to the ground is larger. Key Features - Spark Alloy SL Frame - RockShox Judy 120mm Fork - X-Fusion Nude, TwinLoc, 100mm - SRAM SX Eagle 12 Speed - Shimano Disc Brakes - Syncros X-25 Rims - Maxxis Rekon Tires - Syncros Dropper Post and Parts
Scott Gambler 910
$5,999.99
The all NEW Gambler was designed for one thing and one thing only—pure, unadulterated speed. We made it to get you to take lines you'd never thought imaginable, to make you want to go to the bathroom before your race run - twice. We made it so that when you drop out of the start gate, the only aspect holding you back will be, well, you. Taking years of racing development and mixing it with our carbon expertise, this bike is our answer to the needs of white-knuckle downhill racing. The Gambler, Simply Fast. Evo-Lap Technology - With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up. - With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. - With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we’ve optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without a sacrifice in the stiffness, comfort or impact resistance. The entire range benefited from our EvoLap technology. SW Dropouts - On the Scale, Spark, Genius, Ransom and Gambler we’ve redesigned all the parts that can give us significant benefits in terms of performance and functionality. On the previous model the support of the dropout was a bulky additional part molded to the carbon chain stay. The new dropouts are designed to be integrated on the thru-axle system thanks to a hollow tubular design that allows a simple and light weight structure. Available for SRAM and Shimano DM derailleurs, this dropout increases the stiffnessand avoids damage to the frame in case of impacts on the rear derailleur. One Frame Two Wheels - With our mountain bikes, we try to achieve ultimate versatility. These specific models can switch from 27.5" to 29" wheels with nothing more than the flip of a chip. No need to change the fork, all you need to do is flip a shock mount chip, change your wheels and off you go. The flip chip allows us to maintain a similar BB height when switching from one wheel size to the other which is key to keeping handling similar for both wheel sizes. With 27.5" wheels, you can run either 2.5", 2.6" or 2.8" tires. For the 29er, anywhere from 2.4"-2.6" is good to go. 29" Wheels - Improved roll-over is the most noticeable attribute when it comes to 29” wheels. The big wheels are great for rolling over nasty roots and rocky sections, essentially making it easier to ride these conditions. Improved traction is also a key factor with the increased wheel diameter compared to 27.5” wheels as tire contact to the ground is larger. - Best Roll-Over Performance - Carries Momentum - Maximum Traction surface - Best stability on easy trails - Lowest suspension stress - Great for larger frame sizes - Increase stability on long curve Key Features - Gambler HMX Carbon-Alloy Frame - FOX 40 Performance Elite 203mm Fork - FOX DH X2 200mm Shock - SRAM GX DH 7 Speed - SRAM Code R disc brakes - Maxxis Assegai 2.5" DH Tires
Scott Gambler 920
$4,399.99
The all NEW Gambler was designed for one thing and one thing only—pure, unadulterated speed. We made it to get you to take lines you'd never thought imaginable, to make you want to go to the bathroom before your race run - twice. We made it so that when you drop out of the start gate, the only aspect holding you back will be, well, you. The Gambler 920 is the lightweight alloy DH bike of your dreams, and it too is simply fast. SW Dropouts - On the Scale, Spark, Genius, Ransom and Gambler we’ve redesigned all the parts that can give us significant benefits in terms of performance and functionality. On the previous model the support of the dropout was a bulky additional part molded to the carbon chain stay. The new dropouts are designed to be integrated on the thru-axle system thanks to a hollow tubular design that allows a simple and light weight structure. Available for SRAM and Shimano DM derailleurs, this dropout increases the stiffness and avoids damage to the frame in case of impacts on the rear derailleur. One Frame Two Wheel Sizes - With our mountain bikes, we try to achieve ultimate versatility. These specific models can switch from 27.5" to 29" wheels with nothing more than the flip of a chip. No need to change the fork, all you need to do is flip a shock mount chip, change your wheels and off you go. The flip chip allows us to maintain a similar BB height when switching from one wheel size to the other which is key to keeping handling similar for both wheel sizes. With 27.5" wheels, you can run either 2.5", 2.6" or 2.8" tires. For the 29er, anywhere from 2.4"-2.6" is good to go. 29" Wheels - Improved roll-over is the most noticeable attribute when it comes to 29” wheels. The big wheels are great for rolling over nasty roots and rocky sections, essentially making it easier to ride these conditions. Improved traction is also a key factor with the increased wheel diameter compared to 27.5” wheels as tire contact to the ground is larger. - Best Roll-Over Performance - Carries Momentum - Maximum Traction surface - Best stability on easy trails - Lowest suspension stress - Great for larger frame sizes - Increase stability on long curve Key Features - Gambler Alloy Frame - FOX 40 Performance Elite 203mm Fork - FOX VAN RC 200mm Shock - SRAM GX DH 7 Speed - Shimano 4 Piston disc brakes - Maxxis Assegai 2.5" DH Tires
Scott Gambler 930
$3,699.99
The all NEW Gambler was designed for one thing and one thing only—pure, unadulterated speed. We made it to get you to take lines you'd never thought imaginable, to make you want to go to the bathroom before your race run - twice. We made it so that when you drop out of the start gate, the only aspect holding you back will be, well, you. The Gambler 930 is the lightweight alloy DH bike of your dreams, and it too is simply fast. SW Dropouts - On the Scale, Spark, Genius, Ransom and Gambler we’ve redesigned all the parts that can give us significant benefits in terms of performance and functionality. On the previous model the support of the dropout was a bulky additional part molded to the carbon chain stay. The new dropouts are designed to be integrated on the thru-axle system thanks to a hollow tubular design that allows a simple and light weight structure. Available for SRAM and Shimano DM derailleurs, this dropout increases the stiffness and avoids damage to the frame in case of impacts on the rear derailleur. One Frame Two Wheel Sizes - With our mountain bikes, we try to achieve ultimate versatility. These specific models can switch from 27.5" to 29" wheels with nothing more than the flip of a chip. No need to change the fork, all you need to do is flip a shock mount chip, change your wheels and off you go. The flip chip allows us to maintain a similar BB height when switching from one wheel size to the other which is key to keeping handling similar for both wheel sizes. With 27.5" wheels, you can run either 2.5", 2.6" or 2.8" tires. For the 29er, anywhere from 2.4"-2.6" is good to go. 29" Wheels - Improved roll-over is the most noticeable attribute when it comes to 29” wheels. The big wheels are great for rolling over nasty roots and rocky sections, essentially making it easier to ride these conditions. Improved traction is also a key factor with the increased wheel diameter compared to 27.5” wheels as tire contact to the ground is larger. - Best Roll-Over Performance - Carries Momentum - Maximum Traction surface - Best stability on easy trails - Lowest suspension stress - Great for larger frame sizes - Increase stability on long curve Key Features - Gambler Alloy Frame - RS Boxxer Select 200mm Fork - X-Fusion Vector R 200mm Shock - SRAM X5 8-Speed - Shimano 4 Piston disc brakes - Maxxis Assegai 2.5" DH Tires
Scott Genius 900 Tuned AXS
$7,999.99
The Genius was put on this earth to get you up mountains with ease and to get you back down them in a flash. The Genius 900 Tuned features our TwinLoc Suspension System to always optimize your ride. With a SRAM Eagle AXS Wireless drivetrain and Syncros components, the Tuned is your go to for all day mountain trail huntin'. Any Trail. Any Time. Evo-Lap Technology - With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA(finite element analysis) software, to map out the carbon lay-up. - With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. - With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we’ve optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without a sacrifice in the stiffness, comfort or impact resistance. The entire range benefited from our EvoLap technology. ICCR Cable Routing - On the Scale, Spark, Genius and Ransom, to provide a clean look and a functional solution for all the different control cable standards on the market, cable routing is fully internal and designed for full length cable housing. Routing the cables internally omits bulky external hardware and looks cleaner. The cables can endure a longer lifetime as they are protected within the frame. The entry points are machined alloy removable inserts that come along with the frame and can be chosen according to the setup of the bike. Assembling an electronic group or a dropper post will not be a problem and the look will always be clean-cut. SW Dropouts - On the Scale, Spark, Genius, Ransom and Gambler we’ve redesigned all the parts that can give us significant benefits in terms of performance and functionality. On the previous model the support of the dropout was a bulky additional part molded to the carbon chain stay. The new dropouts are designed to be integrated on the thru-axle system thanks to a hollow tubular design that allows a simple and light weight structure. Available for SRAM and Shimano DM derailleurs, this dropout increases the stiffnessand avoids damage to the frame in case of impacts on the rear derailleur. Fox Nude TR Shock - On several Ransom and Genius models, you'll find the all new FOX NUDE TR EVOL. What the TR allows you to do is to select what sort of progression you would like in Descend mode: more linear, or more progressive. By flipping the Ramp Adjust Lever, you can decide how your shock behaves while descending. - A more linear shock gives a rider the same amount of support throughout a shock's travel. The suspension is supple throughout, and is "easier" to reach the end of the travel, or "bottom out." A more progressive shock will offer more support towards the end of travel, and is harder to bottom out. - These settings are really linked to riding speed. When it is wet, techy, or when impacts are small and riding tends to be slower, one might favor the more linear setting. When the conditions are dry and fast, or when bigger impacts are in play (jumps for instance), then the progressive mode is ideal. With the NUDE TR Evol, choosing and changing is easy. Key Features - Genius Carbon HMX Frame - FOX 36 Float Factory 150mm Fork - FOX Nude TR EVOL, TwinLoc 150mm - SRAM X01 AXS Eagle 12 Speed - Shimano XT 4 Piston Disc Brakes - Syncros Revelstoke Carbon Wheels - Maxxis Kevlar Tires - FOX Dropper Post, Syncros CF Parts
Scott Genius 900 Ultimate AXS
$11,499.99
The Genius was put on this earth to get you up mountains with ease and to get you back down them in a flash. The Genius 900 Ultimate features a FOX Live Valve electronic suspension system, an SRAM XX1 AXS Wireless 12 speed Drivetrain and XTR brakes, alongside carbon wheels and components. Any Trail. Any Time. Evo-Lap Technology - With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up. - With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. - With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we’ve optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without a sacrifice in the stiffness, comfort or impact resistance. The entire range benefited from our EvoLap technology. ICCR Cable Routing - On the Scale, Spark, Genius and Ransom, to provide a clean look and a functional solution for all the different control cable standards on the market, cable routing is fully internal and designed for full length cable housing. Routing the cables internally omits bulky external hardware and looks cleaner. The cables can endure a longer lifetime as they are protected within the frame. The entry points are machined alloy removable inserts that come along with the frame and can be chosen according to the setup of the bike. Assembling an electronic group or a dropper post will not be a problem and the look will always be clean-cut. SW Dropouts - On the Scale, Spark, Genius, Ransom and Gambler we’ve redesigned all the parts that can give us significant benefits in terms of performance and functionality. On the previous model the support of the dropout was a bulky additional part molded to the carbon chain stay. The new dropouts are designed to be integrated on the thru-axle system thanks to a hollow tubular design that allows a simple and light weight structure. Available for SRAM and Shimano DM derailleurs, this dropout increases the stiffness and avoids damage to the frame in case of impacts on the rear derailleur. One frame Two Wheel Sizes - With our mountain bikes, we try to achieve ultimate versatility. These specific models can switch from 27.5" to 29" wheels with nothing more than the flip of a chip. No need to change the fork, all you need to do is flip a shock mount chip, change your wheels and off you go. The flip chip allows us to maintain a similar BB height when switching from one wheel size to the other which is key to keeping handling similar for both wheel sizes. With 27.5" wheels, you can run either 2.5", 2.6" or 2.8" tires. For the 29er, anywhere from 2.4"-2.6" is good to go. Key Features - Genius Carbon HMX Frame - FOX 36 Float Live Valve 150mm Fork - FOX Float Live Valve EVOL, 150mm - SRAM XX1 AXS Eagle 12 Speed - Shimano XTR 4 Piston Disc Brakes - Syncros Revelstoke Carbon Wheels - Maxxis Kevlar Tires - FOX Dropper Post, Syncros CF Parts
Scott Genius 910
$4,999.99
The Genius was put on this earth to get you up mountains with ease and to get you back down them in a flash. The Genius 910 features our TwinLoc Suspension System to always optimize your ride. With a Shimano 12-speed drivetrain and Syncros components, the Genius 910 is action ready. Any Trail. Any Time. Evo-Lap Technology - With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up. - With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. - With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we’ve optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without a sacrifice in the stiffness, comfort or impact resistance. The entire range benefited from our EvoLap technology. ICCR Cable Routing - On the Scale, Spark, Genius and Ransom, to provide a clean look and a functional solution for all the different control cable standards on the market, cable routing is fully internal and designed for full length cable housing. Routing the cables internally omits bulky external hardware and looks cleaner. The cables can endure a longer lifetime as they are protected within the frame. The entry points are machined alloy removable inserts that come along with the frame and can be chosen according to the setup of the bike. Assembling an electronic group or a dropper post will not be a problem and the look will always be clean-cut. SW Dropouts - On the Scale, Spark, Genius, Ransom and Gambler we’ve redesigned all the parts that can give us significant benefits in terms of performance and functionality. On the previous model the support of the dropout was a bulky additional part molded to the carbon chain stay. The new dropouts are designed to be integrated on the thru-axle system thanks to a hollow tubular design that allows a simple and light weight structure. Available for SRAM and Shimano DM derailleurs, this dropout increases the stiffness and avoids damage to the frame in case of impacts on the rear derailleur. Fox Nude TR Shock - On several Ransom and Genius models, you'll find the all new FOX NUDE TR EVOL. What the TR allows you to do is to select what sort of progression you would like in Descend mode: more linear, or more progressive. By flipping the Ramp Adjust Lever, you can decide how your shock behaves while descending. - A more linear shock gives a rider the same amount of support throughout a shock's travel. The suspension is supple throughout, and is "easier" to reach the end of the travel, or "bottom out." A more progressive shock will offer more support towards the end of travel, and is harder to bottom out. - These settings are really linked to riding speed. When it is wet, techy, or when impacts are small and riding tends to be slower, one might favor the more linear setting. When the conditions are dry and fast, or when bigger impacts are in play (jumps for instance), then the progressive mode is ideal. With the NUDE TR Evol, choosing and changing is easy. Key Features - Genius Carbon HMF-Alloy Frame - FOX 36 Float Perf. Elite 150mm Fork - FOX Nude TR EVOL, TwinLoc, 150mm - Shimano XT 12 Speed - Shimano XT 4 Piston Disc Brakes - Syncros Revelstoke 1.5 TR Wheels - Maxxis Kevlar Tires - FOX Dropper Post, Syncros Parts
Scott Genius 920
$4,499.90
The Genius was put on this earth to get you up mountains with ease and to get you back down them in a flash. The Genius 920 features our TwinLoc Suspension System to always optimize your ride. With a SRAM Eagle drivetrain and Syncros components, the Genius 920 is action ready. Any Trail. Any Time. Evo-Lap Technology - With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up. - With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. - With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we’ve optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without a sacrifice in the stiffness, comfort or impact resistance. The entire range benefited from our EvoLap technology. ICCR Cable Routing - On the Scale, Spark, Genius and Ransom, to provide a clean look and a functional solution for all the different control cable standards on the market, cable routing is fully internal and designed for full length cable housing. Routing the cables internally omits bulky external hardware and looks cleaner. The cables can endure a longer lifetime as they are protected within the frame. The entry points are machined alloy removable inserts that come along with the frame and can be chosen according to the setup of the bike. Assembling an electronic group or a dropper post will not be a problem and the look will always be clean-cut. SW Dropouts - On the Scale, Spark, Genius, Ransom and Gambler we’ve redesigned all the parts that can give us significant benefits in terms of performance and functionality. On the previous model the support of the dropout was a bulky additional part molded to the carbon chain stay. The new dropouts are designed to be integrated on the thru-axle system thanks to a hollow tubular design that allows a simple and light weight structure. Available for SRAM and Shimano DM derailleurs, this dropout increases the stiffness and avoids damage to the frame in case of impacts on the rear derailleur. Fox Nude TR Shock - On several Ransom and Genius models, you'll find the all new FOX NUDE TR EVOL. What the TR allows you to do is to select what sort of progression you would like in Descend mode: more linear, or more progressive. By flipping the Ramp Adjust Lever, you can decide how your shock behaves while descending. - A more linear shock gives a rider the same amount of support throughout a shock's travel. The suspension is supple throughout, and is "easier" to reach the end of the travel, or "bottom out." A more progressive shock will offer more support towards the end of travel, and is harder to bottom out. - These settings are really linked to riding speed. When it is wet, techy, or when impacts are small and riding tends to be slower, one might favor the more linear setting. When the conditions are dry and fast, or when bigger impacts are in play (jumps for instance), then the progressive mode is ideal. With the NUDE TR Evol, choosing and changing is easy. Key Features - Genius Carbon HMF-Alloy Frame - FOX 34 Float Performance 150mm Fork - FOX Nude TR EVOL, TwinLoc, 150mm - SRAM GX Eagle 12 Speed - Shimano SLX 4 Piston Disc Brakes - Syncros Revelstoke 2.0 TR Wheels - Maxxis Kevlar Tires - Syncros Dropper Post and Parts
Scott Genius 930
$3,999.99
Any Trail, Any time. With the Genius 930, this phrase has never rung truer. With our TwinLoc Suspension System to always optimize your ride, a SRAM Eagle drivetrain and Syncros components, the 930 will get you up and down the mountain without breaking the bank. Evo-Lap Technology - With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up. - With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. - With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we’ve optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without a sacrifice in the stiffness, comfort or impact resistance. The entire range benefited from our EvoLap technology. ICCR Cable Routing - On the Scale, Spark, Genius and Ransom, to provide a clean look and a functional solution for all the different control cable standards on the market, cable routing is fully internal and designed for full length cable housing. Routing the cables internally omits bulky external hardware and looks cleaner. The cables can endure a longer lifetime as they are protected within the frame. The entry points are machined alloy removable inserts that come along with the frame and can be chosen according to the setup of the bike. Assembling an electronic group or a dropper post will not be a problem and the look will always be clean-cut. SW Dropouts - On the Scale, Spark, Genius, Ransom and Gambler we’ve redesigned all the parts that can give us significant benefits in terms of performance and functionality. On the previous model the support of the dropout was a bulky additional part molded to the carbon chain stay. The new dropouts are designed to be integrated on the thru-axle system thanks to a hollow tubular design that allows a simple and light weight structure. Available for SRAM and Shimano DM derailleurs, this dropout increases the stiffness and avoids damage to the frame in case of impacts on the rear derailleur. One Frame Two Wheel Sizes - With our mountain bikes, we try to achieve ultimate versatility. These specific models can switch from 27.5" to 29" wheels with nothing more than the flip of a chip. No need to change the fork, all you need to do is flip a shock mount chip, change your wheels and off you go. The flip chip allows us to maintain a similar BB height when switching from one wheel size to the other which is key to keeping handling similar for both wheel sizes. With 27.5" wheels, you can run either 2.5", 2.6" or 2.8" tires. For the 29er, anywhere from 2.4"-2.6" is good to go. Genius Trail Geometry - The Genius has always been a bike designed to go up as well as it went down, and vice a versa. For 2018, we wanted to re-emphasize this point. We designed the Genius specifically in search of balance. Compared to the previous iteration, this one is slacker, has longer reach, shorter chainstays and a steeper seat angle. We really wanted geometry figures that would balance out the long front end for more stable descending. What we've ended up with is a bike that climbs like a bat out of hell and gets you down the mountain faster than you can say "dropping!" After years of testing different options, these numbers are a result of taking everything we want out of a bike for the trails we ride, and building it. - Genius Carbon HMF-Alloy Frame - FOX 34 Float Performance 150mm Fork - FOX Nude T EVOL, TwinLoc, 150mm - SRAM NX Eagle 12 Speed - Shimano 4 Piston Disc Brakes - Syncros Revelstoke 2.5 TR Wheels - Maxxis Kevlar Tires - Syncros Dropper Post and Parts
Scott Genius 940
$2,999.99
Go epic—you're on Scott's Genius 940. This rig owns the trail, both up and down. Its lightweight, rugged aluminum frame features a tapered head tube for pinpoint handling, and fast-rolling 29-inch wheels equipped with Schwalbe tires to carry speed and deliver confidence over all terrain. To help you conquer every ride, the Genius 940 boasts 130mm of plush travel, courtesy of a Fox 34 Float fork and Fox Float Performance shock. Other goodies include a smooth-shifting Shimano SLX/XT 2x10-speed drivetrain, tough Syncros components, and Shimano brakes for premium, easily modulated stopping power.
Scott Genius 940
$3,599.99
Any Trail, Any time. With the Genius 940, this phrase has never rung truer. With our TwinLoc Suspension System to always optimize your ride, a Shimano 12-speed drivetrain and Syncros components, the 940 will get you up and down the mountain without breaking the bank. TwinLock Suspension System - With TwinLoc, a rider can effectively control the complete frame, fork, and shock as a system. Why does this matter? A bike with 150mm of suspension travel, correctly set up, has more sag than a bike with 130mm. It's that extra travel that makes it more fun to ride and more capable on the descents, but the greater sag has an oversized effect on the bike's geometry and climbing performance. That's where TwinLoc matters. - TwinLoc helps manage the sag effect in several ways. Whereas most systems only increase low-speed compression in an effort to gain pedaling efficiency, TwinLoc allows us to not only change compression damping, but also to change the spring curve, dynamically altering the geometry of the bike. In Trail mode, the shock is not only firmer, but it has dynamically less travel. The bike sits higher, maintains a steep seat angle for those climbs, and becomes more agile. We also offer a third, full lockout mode for going up in the most efficient manner possible. - These unique settings optimize climbing geometry, even on longer travel bikes. We can eliminate the "long travel effect" that can rob your pedaling efficiency, but we're not robbing you of the full-fun, 150mm travel when you point it downhill. From a race setting, to a lunch ride, to an after work trail shred, being able to switch from mode to mode depending on a trails profile at the push of a lever is paramount to riding faster and having a damned good time. One Frame Two Wheel Sizes - With our mountain bikes, we try to achieve ultimate versatility. These specific models can switch from 27.5" to 29" wheels with nothing more than the flip of a chip. No need to change the fork, all you need to do is flip a shock mount chip, change your wheels and off you go. The flip chip allows us to maintain a similar BB height when switching from one wheel size to the other which is key to keeping handling similar for both wheel sizes. With 27.5" wheels, you can run either 2.5", 2.6" or 2.8" tires. For the 29er, anywhere from 2.4"-2.6" is good to go. Genius Trail Geometry - The Genius has always been a bike designed to go up as well as it went down, and vice versa. For 2018, we wanted to re-emphasize this point. We designed the Genius specifically in search of balance. Compared to the previous iteration, this one is slacker, has longer reach, shorter chainstays and a steeper seat angle. We really wanted geometry figures that would balance out the long front end for more stable descending. What we've ended up with is a bike that climbs like a bat out of hell and gets you down the mountain faster than you can say "dropping!" After years of testing different options, these numbers are a result of taking everything we want out of a bike for the trails we ride, and building it. Virtual 4Link Design - Our suspension kinematic brings perfect balance and control to the platform. Using our Virtual Four Link design, we have honed our suspension feel, pedaling and braking response to work with maximum efficiency and in harmony with our TwinLoc Suspension System. Our kinematic suspension curve gives supple small bump sensitivity and therefore exceptional traction characteristics, perfect support in the mid-stroke and a controlled deep stroke for predictable and comfortable bottom outs. Specific pivot placements ensures efficient pedaling that drives the bike forwards like a startled greyhound and neutral braking that strikes a perfect balance between rider comfort and control, chassis stability and rear wheel traction. From the XC racer, to the downhill enthusiast, the kinematic brings improvements and advantages in all areas and gives a solid fundamental basis for a bike for all riders and all conditions. 29" Wheels - Improved roll-over is the most noticeable attribute when it comes to 29” wheels. The big wheels are great for rolling over nasty roots and rocky sections, essentially making it easier to ride these conditions. Improved traction is also a key factor with the increased wheel diameter compared to 27.5” wheels as tire contact to the ground is larger. - Best Roll-Over Performance - Carries Momentum - Maximum Traction surface - Best stability on easy trails - Lowest suspension stress - Great for larger frame sizes - Increase stability on long curve Key Features - Genius Alloy SL Frame - FOX 34 Float Performance 150mm Fork - FOX Nude T EVOL, TwinLoc Remote - Shimano XT-SLX 12-Speed - Shimano 4 Piston Disc Brakes - Syncros X-30S TR Rims - Maxxis Kevlar Tires - Syncros Dropper Post and Parts
Scott Genius 950
$2,999.99
Everything you love about the Genius, but with a lower price point. The Genius 950 features TwinLoc Suspension Technology to always optimize your ride, a SRAM Eagle drivetrain and Syncros components. Grab your bike, and get on the trail. One Frame Two Wheel Sizes - With our mountain bikes, we try to achieve ultimate versatility. These specific models can switch from 27.5" to 29" wheels with nothing more than the flip of a chip. No need to change the fork, all you need to do is flip a shock mount chip, change your wheels and off you go. The flip chip allows us to maintain a similar BB height when switching from one wheel size to the other which is key to keeping handling similar for both wheel sizes. With 27.5" wheels, you can run either 2.5", 2.6" or 2.8" tires. For the 29er, anywhere from 2.4"-2.6" is good to go. -Genius Trail Geometry - The Genius has always been a bike designed to go up as well as it went down, and vice versa. For 2018, we wanted to re-emphasize this point. We designed the Genius specifically in search of balance. Compared to the previous iteration, this one is slacker, has longer reach, shorter chainstays and a steeper seat angle. We really wanted geometry figures that would balance out the long front end for more stable descending. What we've ended up with is a bike that climbs like a bat out of hell and gets you down the mountain faster than you can say "dropping!" After years of testing different options, these numbers are a result of taking everything we want out of a bike for the trails we ride, and building it. Virtual 4Link Design - Our suspension kinematic brings perfect balance and control to the platform. Using our Virtual Four Link design, we have honed our suspension feel, pedaling and braking response to work with maximum efficiency and in harmony with our TwinLoc Suspension System. Our kinematic suspension curve gives supple small bump sensitivity and therefore exceptional traction characteristics, perfect support in the mid-stroke and a controlled deep stroke for predictable and comfortable bottom outs. Specific pivot placements ensures efficient pedaling that drives the bike forwards like a startled greyhound and neutral braking that strikes a perfect balance between rider comfort and control, chassis stability and rear wheel traction. From the XC racer, to the downhill enthusiast, the kinematic brings improvements and advantages in all areas and gives a solid fundamental basis for a bike for all riders and all conditions. 29" Wheels - Improved roll-over is the most noticeable attribute when it comes to 29” wheels. The big wheels are great for rolling over nasty roots and rocky sections, essentially making it easier to ride these conditions. Improved traction is also a key factor with the increased wheel diameter compared to 27.5” wheels as tire contact to the ground is larger. - Best Roll-Over Performance - Carries Momentum - Maximum Traction surface - Best stability on easy trails - Lowest suspension stress - Great for larger frame sizes - Increase stability on long curve Key Features - Genius Alloy SL Frame - FOX 34 Float Performance 150mm Fork - FOX Float, TwinLoc, 150mm - SRAM NX Eagle 12-Speed - Shimano 4 Piston Disc Brakes - Syncros X-30S TR Rims - Maxxis Kevlar Tires - Syncros Dropper Post and Parts
Scott Genius eRIDE 920
$4,999.99
Welcome to the next E-Bike generation with the new Genius eRIDE 920. Avant-garde design, cutting-edge technologies and integration, and advanced battery management, the Genius eRIDE 920 places priority on the riding experience. This is the ultimate choice for riders who want confidence when the terrain gets rougher! Bosch Power Tube Thanks to their range, long service life, intelligent battery management system and easy handling, Bosch Power Tube lithium-ion batteries are among the most modern on the market. All those decades of Bosch experience has paid off! Bosch Performance CX Gen 4 Drive Unit The new Performance CX generation is now 48% smaller and 25% lighter compared to the previous generation. More compact but no less powerful, the new Bosch Performance CX Generation 4 comes with a maximum power output of 75Nm and 340%. Choose between 5 assist modes or opt for the comfort of the eMTB mode which automatically adapts the assistance like an automatic gearbox does in a car. Scott Impact Damper The bottom bracket area is exposed to flying rocks or other potential impacts, therefore we have developed our own specific skid plate, the “Impact Damper”. It is reinforced to handle impacts, is covered with a rubber layer to reduce noise, and is ventilated to improve drive unit airflow. eRide Advanced Design With this new E-Bike generation, the design has been pushed further than ever before. More than a battery integrated into the frame, we see the bike as a system where every part must be taken into consideration. Therefore, to improve the integration, we have worked a lot on the line continuity but also on the design balance from the headtube to the dropouts. Enjoy a bike with a unique character! Syncros Fork Stop Headset Developed in collaboration with Syncros for the Genius eRIDE, the fork stop restricts the range of motion to 60 degrees, preventing the fork crown from impacting the frame, protecting you and your bike. Scott eRide Range Extender Compatible SCOTT eRIDE engineering team has developed a specific mount that is fixed to the bottle cage slots. A standard 500Wh Bosch battery (sold separately) can be added on the Range Extender mount. This results in a total of 1125Wh. To recharge, just one charger is needed. The Bosch digital display will take into consideration both batteries. Focus on your journey and not on your battery level! - Genius eRIDE Alloy Frame - FOX 36 Rhythm 150mm Fork - FOX Float EVOL, 150mm, TwinLoc Rear Shock - SRAM SX Eagle 12 Speed Drivetrain - Bosch CX, up to 1125Wh, PowerTube Battery - Shimano 4 Piston Disc Brakes - Schwalbe Kevlar 29 x 2.6" Tires - Syncros Dropper Post
Scott Genius eRide 900 Tuned
$7,499.99
The Genius eRIDE is a pedal-assist game changer. With the Shimano STEPS system and modern geometry, you can explore the mountains like you never have before. The TwinLoc system allows you to not only change compression dampening but also to change the spring curve, dynamically altering the geometry of the bike. This allows you to have the most efficient bike handling in any riding situation, which is even more valuable with the extra weight of an E-Bike. With the steps E-8000 series, Shimano delivers next-level component integration, connectivity, and performance. To meet MTB specific needs, the E-8000 series was designed with all day riding in mind. The Lithium-Ion battery has a 500WH capacity that can be charged up to 80% in only 2.5 hours. It features a low-profile drive system, specifically designed for mountain bikes, which improves both impact and vibration resistance. The compact design allows for shorter chain stays and more tire clearance, and its low weight substantially improves handling and ride feel. You can switch between 3 assist modes: ECO, TRAIL, and BOOST, using levers that were designed for mountain bikes to offer a similar feel to that of a gear shifter. The Genius eRide 900 features a lightweight aluminum frame with a tapered headtube, boost spacing, and internal routing. The Fox Float 36 with Kashima coating and Fox Nude TR Evol rear shock provide 150mm of trail-taming suspension. A Shimano XT STEPS crankset is paired with SRAM X01 Eagle rear derailleur and GX shifter, for an accurate and reliable 12-speed drivetrain. DT Swiss H1825 Spline wheels are light, stiff, and built for the extra demands of an e-MTB. They come mounted with a perfect combo of Schwalbe Magic Mary front and Hans Dampf rear tires. Completing the performance package, a Fox Transfer dropper post with Kashima coating increases this bike's aggressive abilities, while a 740mm Syncros carbon bar adds extra stiffness to the front end.
Scott Genius eRide 910
$6,499.99
The Genius eRIDE is a pedal-assist game changer. With the Shimano STEPS system and modern geometry, you can explore the mountains like you never have before. The TwinLoc system allows you to not only change compression dampening but also to change the spring curve, dynamically altering the geometry of the bike. This allows you to have the most efficient bike handling in any riding situation, which is even more valuable with the extra weight of an E-Bike. With the steps E-8000 series, Shimano delivers next-level component integration, connectivity, and performance. To meet MTB specific needs, the E-8000 series was designed with all day riding in mind. The Lithium-Ion battery has a 500WH capacity that can be charged up to 80% in only 2.5 hours. It features a low-profile drive system, specifically designed for mountain bikes, which improves both impact and vibration resistance. The compact design allows for shorter chain stays and more tire clearance, and its low weight substantially improves handling and ride feel. You can switch between 3 assist modes: ECO, TRAIL, and BOOST, using levers that were designed for mountain bikes to offer a similar feel to that of a gear shifter. The Genius eRide 910 features a lightweight aluminum frame with a tapered headtube, boost spacing, and internal routing. The Fox Float Performance Elite fork has 36mm stanchions for exceptional stiffness and predictable handling. It's paired with a Fox Nude TR Evol rear shock to provide 150mm of trail-taming suspension. A Shimano XT STEPS crankset is paired with a SRAM NX Eagle drivetrain, offering a massive 12-gear range for tackling all kinds of terrain. Shimano BR-M640 ZEE Disc brakes provide a level of power and control intended for downhill riding, which is ideal for handling the added momentum of an e-MTB. The Syncros X-30S rims are tubeless ready, and at 30mm wide are perfectly suited for plus-sized tires. They come mounted with a perfect combo of Schwalbe Magic Mary front and Hans Dampf rear tires. A Fox Transfer dropper post further increases this bike's aggressive abilities.
Scott Ransom 900 Tuned
$7,599.99
The Ransom. 170mm of trail-munchin', climb-crushing, stage-winning, all-day-pinning mountain biking excellence. The Tuned version comes equipped with our TwinLoc Suspension System, a SRAM Eagle groupset, and high-end Syncros components to help you get away with murder, regardless of your ability level. Evo-Lap Technology With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up. With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we’ve optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super-light and compact frame without a sacrifice in the stiffness, comfort or impact resistance. The entire range benefitted from our EvoLap technology. ICCR Cable Routing On the Scale, Spark, Genius and Ransom, to provide a clean look and a functional solution for all the different control cable standards on the market, cable routing is fully internal and designed for full length cable housing. Routing the cables internally omits bulky external hardware and looks cleaner. The cables can endure a longer lifetime as they are protected within the frame. The entry points are machined alloy removable inserts that come along with the frame and can be chosen according to the setup of the bike. Assembling an electronic group or a dropper post will not be a problem and the look will always be clean-cut. SW Dropouts On the Scale, Spark, Genius, Ransom and Gambler we’ve redesigned all the parts that can give us significant benefits in terms of performance and functionality. On the previous model the support of the dropout was a bulky additional part molded to the carbon chain stay. The new dropouts are designed to be integrated on the thru-axle system thanks to a hollow tubular design that allows a simple and light weight structure. Available for SRAM and Shimano DM derailleurs, this dropout increases the stiffness and avoids damage to the frame in case of impacts on the rear derailleur. Ransom Carbon Construction While we always aim to have lightweight carbon bikes here at SCOTT, we never compromise frame strength when doing so. Taking into consideration the riding this bike is designed for, we have created our strongest carbon frame to date. Through clever layering and reinforcement in certain zones we obtain the stiffness wanted between the head tube and the rear wheel axle via a path following the downtube and the chainstays - we call this the stiffness backbone. The Ransom being a 1x only bike allowed us to optimize the width of the main pivot which is normally the weak point on this stiffness path. Additionally, the Trunnion mount on the DT close to the BB allows us to obtain great stiffness at the bottom of the bike and lightweight construction up top for compliance and for having the center of gravity as low as possible. Fox Nude TR Shock - On several Ransom and Genius models, you'll find the all new FOX NUDE TR EVOL. What the TR allows you to do is to select what sort of progression you would like in Descend mode: more linear, or more progressive. By flipping the Ramp Adjust Lever, you can decide how your shock behaves while descending. - A more linear shock gives a rider the same amount of support throughout a shock's travel. The suspension is supple throughout, and is "easier" to reach the end of the travel, or "bottom out." A more progressive shock will offer more support towards the end of travel, and is harder to bottom out. - These settings are really linked to riding speed. When it is wet, techy, or when impacts are small and riding tends to be slower, one might favor the more linear setting. When the conditions are dry and fast, or when bigger impacts are in play (jumps for instance), then the progressive mode is ideal. With the NUDE TR Evol, choosing and changing is easy. Key Features - Ransom Carbon HMX Frame - FOX 36 Float Factory 170mm Fork - FOX Nude TR EVOL, TwinLoc, 170mm - SRAM X01 Eagle 12-Speed - Shimano XT 4 Piston Disc Brakes - Syncros Revelstoke 1.5 TR Wheels - Maxxis Minion DHF Kevlar Tires - FOX Dropper Post, Syncros CF Parts
Scott Ransom 910
$5,499.99
The Ransom. 170mm of trail-munchin', climb-crushing, stage-winning, all-day-pinning, mountain biking excellence. The 910 comes equipped with our TwinLoc Suspension System, a SRAM Eagle groupset and Syncros components to help you get away with murder, regardless of your ability level. Evo-Lap Technology - With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up. - With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. - With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we’ve optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super-light and compact frame without a sacrifice in the stiffness, comfort or impact resistance. The entire range benefited from our EvoLap technology. ICCR Cable Routing - On the Scale, Spark, Genius and Ransom, to provide a clean look and a functional solution for all the different control cable standards on the market, cable routing is fully internal and designed for full-length cable housing. Routing the cables internally omits bulky external hardware and looks cleaner. The cables can endure a longer lifetime as they are protected within the frame. The entry points are machined alloy removable inserts that come along with the frame and can be chosen according to the setup of the bike. Assembling an electronic group or a dropper post will not be a problem and the look will always be clean-cut. SW Dropouts - On the Scale, Spark, Genius, Ransom and Gambler we’ve redesigned all the parts that can give us significant benefits in terms of performance and functionality. On the previous model, the support of the dropout was a bulky additional part molded to the carbon chain stay. The new dropouts are designed to be integrated on the thru-axle system thanks to a hollow tubular design that allows a simple and light weight structure. Available for SRAM and Shimano DM derailleurs, this dropout increases the stiffness and avoids damage to the frame in case of impacts on the rear derailleur. Ransom Carbon Construction - While we always aim to have lightweight carbon bikes here at SCOTT, we never compromise frame strength when doing so. Taking into consideration the riding this bike is designed for, we have created our strongest carbon frame to date. Through clever layering and reinforcement in certain zones we obtain the stiffness wanted between the head tube and the rear wheel axle via a path following the downtube and the chainstays - we call this the stiffness backbone. The Ransom being a 1x only bike allowed us to optimize the width of the main pivot which is normally the weak point on this stiffness path. Additionally, the Trunnion mount on the DT close to the BB allows us to obtain great stiffness at the bottom of the bike and lightweight construction up top for compliance and for having the center of gravity as low as possible. Fox Nude TR Shock - On several Ransom and Genius models, you'll find the all new FOX NUDE TR EVOL. What the TR allows you to do is to select what sort of progression you would like in Descend mode: more linear, or more progressive. By flipping the Ramp Adjust Lever, you can decide how your shock behaves while descending. - A more linear shock gives a rider the same amount of support throughout a shock's travel. The suspension is supple throughout, and is "easier" to reach the end of the travel, or "bottom out." A more progressive shock will offer more support towards the end of travel, and is harder to bottom out. - These settings are really linked to riding speed. When it is wet, techy, or when impacts are small and riding tends to be slower, one might favor the more linear setting. When the conditions are dry and fast, or when bigger impacts are in play (jumps for instance), then the progressive mode is ideal. With the NUDE TR Evol, choosing and changing is easy. Key Features - Ransom Carbon HMX-Alloy Frame - FOX 36 Float Perf. Elite 170mm Fork - FOX Nude TR EVOL, TwinLoc, 170mm - SRAM GX Eagle 12 Speed - Shimano XT 4 Piston Disc Brakes - Syncros Revelstoke 2.0 TR Wheels - Maxxis Minion DHF Kevlar Tires - FOX Dropper Post, Syncros Parts
Scott Ransom 920
$3,799.99
The Ransom. 170mm of trail-munchin', climb-crushing, stage-winning, all-day-pinning mountain biking excellence. The 920 comes equipped with our TwinLoc Suspension System, a SRAM Eagle groupset and Syncros components to help you get away with murder, regardless of your ability level. Ransom Geometry - When designing the Ransom, speed was a topic that was always at the forefront of discussion. Naturally, the geometry of the bike was selected to accompany the type of riding it is intended for. With 170mm of travel, this unique 29er has a geometry that will get you to the top comfortably and then back down faster than ever before. Long, slack and stable at speed, this rig can tame any descent. However, we didn't want to cut any corners with regards to seat angle or position. Where we live, big days involve plenty of climbing, and we think it's important that climbs can be as fun as the downs – proper climbing position is essential to that. Ransom Protection - Protecting the Ransom's frame was an integral part of the project. We've integrated a clever DT protector under the BB and along the downtube, and have also implemented a newly developed, noise-silencing chainstay/seatstay protector. A quiet ride is a fast ride. TwinLoc Suspension - With TwinLoc, a rider can effectively control the complete frame, fork, and shock as a system. Why does this matter? A bike with 150mm of suspension travel, correctly set up, has more sag than a bike with 130mm. It's that extra travel that makes it more fun to ride and more capable on the descents, but the greater sag has an oversized effect on the bike's geometry and climbing performance. That's where TwinLoc matters. - TwinLoc helps manage the sag effect in several ways. Whereas most systems only increase low-speed compression in an effort to gain pedaling efficiency, TwinLoc allows us to not only change compression damping, but also to change the spring curve, dynamically altering the geometry of the bike. In Trail mode, the shock is not only firmer, but it has dynamically less travel. The bike sits higher, maintains a steep seat angle for those climbs, and becomes more agile. We also offer a third, full lockout mode for going up in the most efficient manner possible. - These unique settings optimize climbing geometry, even on longer travel bikes. We can eliminate the "long travel effect" that can rob your pedaling efficiency, but we're not robbing you of the full-fun, 150mm travel when you point it downhill. From a race setting, to a lunch ride, to an after work trail shred, being able to switch from mode to mode depending on a trails profile at the push of a lever is paramount to riding faster and having a damned good time. One Frame Two Wheel Sizes - With our mountain bikes, we try to achieve ultimate versatility. These specific models can switch from 27.5" to 29" wheels with nothing more than the flip of a chip. No need to change the fork, all you need to do is flip a shock mount chip, change your wheels and off you go. The flip chip allows us to maintain a similar BB height when switching from one wheel size to the other which is key to keeping handling similar for both wheel sizes. With 27.5" wheels, you can run either 2.5", 2.6" or 2.8" tires. For the 29er, anywhere from 2.4"-2.6" is good to go. 29" Wheels - Improved roll-over is the most noticeable attribute when it comes to 29” wheels. The big wheels are great for rolling over nasty roots and rocky sections, essentially making it easier to ride these conditions. Improved traction is also a key factor with the increased wheel diameter compared to 27.5” wheels as tire contact to the ground is larger. - Best Roll-Over Performance - Carries Momentum - Maximum Traction surface - Best stability on easy trails - Lowest suspension stress - Great for larger frame sizes - Increase stability on long curve Key Features - Ransom Alloy SL Frame - FOX 36 Float Performance 170mm Fork - FOX Nude T EVOL, TwinLoc, 170mm - SRAM NX Eagle 12 Speed - Shimano 4 Piston Disc Brakes - Syncros Revelstoke 2.5 TR Wheels - Maxxis Minion DHF Kevlar Tires - Syncros Dropper Post and Parts
Scott Ransom 930
$2,999.99
The Ransom. 170mm of trail-munchin', climb-crushing, stage-winning all-day-pinning mountain biking excellence. The 930 comes equipped with our TwinLoc Suspension System, a SRAM eagle groupset and Syncros components to help you get away with murder, at a fraction of the cost. Ransom Geometry - When designing the Ransom, speed was a topic that was always at the forefront of discussion. Naturally, the geometry of the bike was selected to accompany the type of riding it is intended for. With 170mm of travel, this unique 29er has a geometry that will get you to the top comfortably and then back down faster than ever before. Long, slack and stable at speed, this rig can tame any descent. However, we didn't want to cut any corners with regards to seat angle or position. Where we live, big days involve plenty of climbing, and we think it's important that climbs can be as fun as the downs – proper climbing position is essential to that. Ransom Protection - Protecting the Ransom's frame was an integral part of the project. We've integrated a clever DT protector under the BB and along the downtube, and have also implemented a newly developed, noise-silencing chainstay/seatstay protector. A quiet ride is a fast ride. Twinloc Suspension System - With TwinLoc, a rider can effectively control the complete frame, fork, and shock as a system. Why does this matter? A bike with 150mm of suspension travel, correctly set up, has more sag than a bike with 130mm. It's that extra travel that makes it more fun to ride and more capable on the descents, but the greater sag has an oversized effect on the bike's geometry and climbing performance. That's where TwinLoc matters. - TwinLoc helps manage the sag effect in several ways. Whereas most systems only increase low-speed compression in an effort to gain pedaling efficiency, TwinLoc allows us to not only change compression damping, but also to change the spring curve, dynamically altering the geometry of the bike. In Trail mode, the shock is not only firmer, but it has dynamically less travel. The bike sits higher, maintains a steep seat angle for those climbs, and becomes more agile. We also offer a third, full lockout mode for going up in the most efficient manner possible. - These unique settings optimize climbing geometry, even on longer travel bikes. We can eliminate the "long travel effect" that can rob your pedaling efficiency, but we're not robbing you of the full-fun, 150mm travel when you point it downhill. From a race setting, to a lunch ride, to an after work trail shred, being able to switch from mode to mode depending on a trails profile at the push of a lever is paramount to riding faster and having a damned good time. One Frame Two Wheel Sizes - With our mountain bikes, we try to achieve ultimate versatility. These specific models can switch from 27.5" to 29" wheels with nothing more than the flip of a chip. No need to change the fork, all you need to do is flip a shock mount chip, change your wheels and off you go. The flip chip allows us to maintain a similar BB height when switching from one wheel size to the other which is key to keeping handling similar for both wheel sizes. With 27.5" wheels, you can run either 2.5", 2.6" or 2.8" tires. For the 29er, anywhere from 2.4"-2.6" is good to go. 29" Wheels - Improved roll-over is the most noticeable attribute when it comes to 29” wheels. The big wheels are great for rolling over nasty roots and rocky sections, essentially making it easier to ride these conditions. Improved traction is also a key factor with the increased wheel diameter compared to 27.5” wheels as tire contact to the ground is larger. - Best Roll-Over Performance - Carries Momentum - Maximum Traction surface - Best stability on easy trails - Lowest suspension stress - Great for larger frame sizes - Increase stability on long curve Key Features - Ransom Alloy SL Frame - RockShox Yari 170mm Fork - X-Fusion Nude, TwinLoc, 170mm - SRAM SX Eagle 12 Speed - Shimano 4 Piston Disc Brakes - Syncros X-30S TR Rims - Maxxis Minion DHF Kevlar Tires - Syncros Dropper Post and Parts
Scott Spark 600
$1,999.99
SCOTT’s Spark 600 packs solid trail bike spec into a machine built for smaller riders. With its lightweight alloy frame, 1x11-speed SRAM NX drivetrain, and Shimano hydraulic disc brakes, it gives younger riders a big leg up and small riders access to a size-smart bike with high-quality components. X-Fusion meets the suspension needs with ease, offering 120mm of travel for capable handling and a lot of fun in a wide variety of terrain. Its Maxxis Ardent tires have low rolling resistance while offering a ton of grip, and Syncros handlebar, grips, stem, saddle, and seatpost take a unified approach to comfort and control.
Scott Spark 700
$2,699.99
The Spark 700 is an ideal balance of quality, value, and performance for aspiring up-and-comers. A lightweight, durable frame that offers 120mm of travel through a Fox EVOL shock, a matching 120mm Fox 32 Rhythm fork, and a Syncros wheelset provide a sound foundation for capable riding anywhere on the mountain. The Maxxis tires grip tenaciously while you put the power to the Spark’s SRAM NX Eagle 12-speed drivetrain, certain to provide the gear range to get you far enough up the trail to be happy you have a pair of hardy Shimano hydraulic disc brakes to control your descent. And, with lightweight Syncros components connecting you to the bike, you’ll look forward to the technical climbs and rock-strewn off-cambers, carving it all like Thanksgiving turkey.
Scott Spark 740
$2,099.99
Do you want a World Cup inspired XC bike, but at a fraction of the cost? Look no further than the Spark 730. Blending the featherweight lineage of a dedicated race bike, with the singletrack chops of a 130mm travel ripper, this bike is up for anything. A RockShox Recon fork and X-Fusion shock make easy work of rough terrain, while the wide 27.5 x 2.8-inch Maxxis tires find traction and inspire you to push harder when the going gets tough. With updated Spark frame design features, Scott's TwinLoc Suspension System, a SRAM 1x11 drivetrain, plus Syncros components, this Spark is sure to light a fire.
Scott Spark 900 Ultimate AXS
$8,999.99
The Spark 900 RC Team features a slew of high-end components in an affordable package. Our TwinLoc Suspension System, a 12-speed SRAM Eagle drivetrain, Shimano brakes and Syncros components combine to create a dream-worthy carbon full-suspension race bike. Evo-Lap Technology - With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up. - With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. - With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we’ve optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without a sacrifice in the stiffness, comfort or impact resistance. The entire range benefitted from our EvoLap technology. ICCR Cable Routing - On the Scale, Spark, Genius and Ransom, to provide a clean look and a functional solution for all the different control cable standards on the market, cable routing is fully internal and designed for full-length cable housing. Routing the cables internally omits bulky external hardware and looks cleaner. The cables can endure a longer lifetime as they are protected within the frame. The entry points are machined alloy removable inserts that come along with the frame and can be chosen according to the setup of the bike. Assembling an electronic group or a dropper post will not be a problem and the look will always be clean-cut. SW Dropouts - On the Scale, Spark, Genius, Ransom and Gambler we’ve redesigned all the parts that can give us significant benefits in terms of performance and functionality. On the previous model the support of the dropout was a bulky additional part molded to the carbon chain stay. The new dropouts are designed to be integrated on the thru-axle system thanks to a hollow tubular design that allows a simple and light weight structure. Available for SRAM and Shimano DM derailleurs, this dropout increases the stiffness and avoids damage to the frame in case of impacts on the rear derailleur. TwinLoc Suspension System - With TwinLoc, a rider can effectively control the complete frame, fork, and shock as a system. Why does this matter? A bike with 150mm of suspension travel, correctly set up, has more sag than a bike with 130mm. It's that extra travel that makes it more fun to ride and more capable on the descents, but the greater sag has an oversized effect on the bike's geometry and climbing performance. That's where TwinLoc matters. - TwinLoc helps manage the sag effect in several ways. Whereas most systems only increase low-speed compression in an effort to gain pedaling efficiency, TwinLoc allows us to not only change compression damping, but also to change the spring curve, dynamically altering the geometry of the bike. In Trail mode, the shock is not only firmer, but it has dynamically less travel. The bike sits higher, maintains a steep seat angle for those climbs, and becomes more agile. We also offer a third, full lockout mode for going up in the most efficient manner possible. - These unique settings optimize climbing geometry, even on longer travel bikes. We can eliminate the "long travel effect" that can rob your pedaling efficiency, but we're not robbing you of the full-fun, 150m travel when you point it downhill. From a race setting, to a lunch ride, to an after work trail shred, being able to switch from mode to mode depending on a trails profile at the push of a lever is paramount to riding faster and having a damned good time. Key Features - Spark RC Carbon HMF Frame - RockShox SID Select+RL3 100mm Fork - FOX Nude EVOL, TwinLoc Susp. System - SRAM GX Eagle 12 Speed - Shimano SLX Disc Brakes - Syncros Silverton 2.5 TR Wheels - Maxxis Rekon Race Kevlar Tires - Syncros Parts
Scott Spark 910
$4,799.99
The SCOTT Spark 910 boasts a super-light Carbon Fiber mainframe with an Alloy swingarm. The 910 comes equipped with a Shimano 12-speed drivetrain, a custom FOX Nude shock, and our TwinLoc Suspension System to always optimize your ride. This bike is ready for any trail in your near future. Evo-Lap Technology - With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up. ICCR Cable Routing - On the Scale, Spark, Genius and Ransom, to provide a clean look and a functional solution for all the different control cable standards on the market, cable routing is fully internal and designed for full-length cable housing. Routing the cables internally omits bulky external hardware and looks cleaner. The cables can endure a longer lifetime as they are protected within the frame. The entry points are machined alloy removable inserts that come along with the frame and can be chosen according to the setup of the bike. Assembling an electronic group or a dropper post will not be a problem and the look will always be clean-cut. SW Dropouts - On the Scale, Spark, Genius, Ransom and Gambler we’ve redesigned all the parts that can give us significant benefits in terms of performance and functionality. On the previous model the support of the dropout was a bulky additional part molded to the carbon chain stay. The new dropouts are designed to be integrated on the thru-axle system thanks to a hollow tubular design that allows a simple and light weight structure. Available for SRAM and Shimano DM derailleurs, this dropout increases the stiffness and avoids damage to the frame in case of impacts on the rear derailleur. 29" Wheels Improved roll-over is the most noticeable attribute when it comes to 29” wheels. The big wheels are great for rolling over nasty roots and rocky sections, essentially making it easier to ride these conditions. Improved traction is also a key factor with the increased wheel diameter compared to 27.5” wheels as tire contact to the ground is larger. - Best Roll-Over Performance - Carries Momentum - Maximum Traction surface - Best stability on easy trails - Lowest suspension stress - Great for larger frame sizes - Increase stability on long curve Key Features - Spark Carbon HMF-Alloy Frame - FOX 34 SC Float P. Elite 120mm Fork - FOX Nude EVOL, 120mm, TwinLoc - Shimano XT 12 Speed - Shimano XT Disc Brakes - Syncros Silverton 1.5 TR Wheels - Maxxis Rekon Kevlar Tires - FOX Dropper Post, Syncros Parts
Scott Spark 920
$4,199.99
Scott’s Spark 920 makes use of a stiff, light, frame, smart suspension, and large-diameter 29er wheels to maintain speed and dominate all kinds of terrain. Its nimble, lightweight HMF carbon/alloy frame accelerates instantly, while the tapered head tube and 148 x 12mm rear axle boost control and stiffness, allowing you to carve turns with pinpoint precision. Scott’s TwinLoc remote lets you make on-the-fly adjustments to the Fox Float fork and Nude EVOL shock's 120mm of travel, so you can transition from fast climbs to technical descents with the flick of a switch. For the ever-changing trail, Syncros wheels hold your momentum, while tacky Maxxis tires dance over the dirt. The SRAM GX-X1 Eagle 12-speed group and the Shimano SLX brakes spec’d on this rig ensure your braking is just as dialed as your shifting and the included Fox dropper post ensures your saddle is right where you need it to be at all times.
Scott Spark 920
$3,999.99
The SCOTT Spark 920 boasts a super-light HMF Carbon Fiber mainframe with an Alloy swingarm. The 920 comes equipped with a custom FOX Nude shock, a SRAM Eagle 12-speed drivetrain and our TwinLoc Suspension System to always optimize your ride. This bike is ready for any trail in your near future. Evo-Lap Technology - With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up. - With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. - With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we’ve optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without a sacrifice in the stiffness, comfort or impact resistance. The entire range benefitted from our EvoLap technology. ICCR Cable Routing - On the Scale, Spark, Genius and Ransom, to provide a clean look and a functional solution for all the different control cable standards on the market, cable routing is fully internal and designed for full-length cable housing. Routing the cables internally omits bulky external hardware and looks cleaner. The cables can endure a longer lifetime as they are protected within the frame. The entry points are machined alloy removable inserts that come along with the frame and can be chosen according to the setup of the bike. Assembling an electronic group or a dropper post will not be a problem and the look will always be clean-cut. SW Dropouts - On the Scale, Spark, Genius, Ransom and Gambler we’ve redesigned all the parts that can give us significant benefits in terms of performance and functionality. On the previous model the support of the dropout was a bulky additional part molded to the carbon chain stay. The new dropouts are designed to be integrated on the thru-axle system thanks to a hollow tubular design that allows a simple and light weight structure. Available for SRAM and Shimano DM derailleurs, this dropout increases the stiffness and avoids damage to the frame in case of impacts on the rear derailleur. TwinLoc Suspension System - With TwinLoc, a rider can effectively control the complete frame, fork, and shock as a system. Why does this matter? A bike with 150mm of suspension travel, correctly set up, has more sag than a bike with 130mm. It's that extra travel that makes it more fun to ride and more capable on the descents, but the greater sag has an oversized effect on the bike's geometry and climbing performance. That's where TwinLoc matters. Key Features - Spark Carbon HMF-Alloy Frame - FOX SC 34 Float Perf. 120mm Fork - FOX Nude EVOL, 120mm, TwinLoc - SRAM GX Eagle 12 Speed - Shimano SLX Disc Brakes - Syncros Silverton 2.5 TR Wheels - Maxxis Rekon Kevlar Tires - Syncros Dropper Post and Parts
Page 1 of 4 Next page