- Service parts for E-13 chainguides - Fits: 06+ single ring guides
$12.95 - $14.95
- Lower slider replacement parts for E-13 chainguides
absoluteBLACK Chainring Bolts are used to mount chainrings to the crank arms. Bolts are crafted from 7075 T6 aluminum and hard anodized for durability. - Bolts use a Torx T30 interface for greater reliability - Long bolts are used for the following chainrings: 110 BCD 4-bolt outer and inner road oval, 104 BCD oval 26/28/32t, 64 BCD round 26/28/30t, 94 BCD oval 30/32/34t, all CX round chainrings - Set of 4
absoluteBLACK Chainring Bolts are used to mount chainrings to the crank arms. Bolts are crafted from 7075 T6 aluminum and hard anodized for durability. - Bolts use a Torx T30 interface for greater reliability - Long bolts are used for the following chainrings: 110 BCD 5-bolt outer and inner road oval, 130 BCD 5-bolt outer and inner road oval, 104 BCD oval 26/28/32t, 64 BCD round 26/28/30t, 94 BCD oval 30/32/34t, all CX round chainrings - Set of 5
absoluteBLACK Chainring Bolts are used to mount chainrings to the crank arms. Bolts are crafted from 7075 T6 aluminum and hard anodized for durability. - Bolts use a Torx T30 interface for greater reliability - Short bolts are used for the following chainrings: 104 BCD oval 34/36t, 104 BCD round 32/34/36/38t, and bashrings - Set of 5
Wheels Manufacturing BB30 Bottom Bracket Adaptor for Hollowtech II Cranks adapts 24mm Spindle Cranks (Shimano Hollowtech II, FSA, Race Face EXI, etc.) to work on BB30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin.
Wheels Manufacturing Wave Washers help eliminate side play in cranks or pre-loaded angular contact bearings. Please refer to your crankset manufacturer's installation instructions for proper placement. - 24mm for Shimano Hollowtech II, FSA, Race Face EXI, SRAM GPX - 30mm for BB30, PF30, BB86, BB92 and other cranks with 30mm spindles - Uncompressed Thickness: 2.1mm - Compressed Thickness: 0.5mm - Spring Steel - 10 per bag
Wheels Manufacturing FSA PF30 Adapter for 24mm Spindle Cranks adapts 24mm Spindle Cranks (Shimano, FSA, etc.) to work on Pressfit 30 frames with FSA's PF30 bottom bracket installed. Simply tap the adapters into the 6806 bearing in the BB shell, install the spindle and cranks. Use our Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. - Machined engineering-grade Delrin - 48g/pr *NOTE: The stock bottom bracket seals must be removed before installing the Pressfit 30 adapter
Machined aluminum spacers for freehubs. Great for fine tuning freewheel and cassette placement or improving chainline. Also good for bottom bracket spacing with BSA BB cups. - Inner Diameter: 35.0mm - Outer Diameter: 40.7mm - Material: Aluminum - Finish: Polished - Bags of 10
- aluminum Hollowtech-II (HT8) crank-arm to BB-spindle Mounting Bolt - Bolt: only one needed for non-drive side
- Adapts American/Pro BMX frames with a non-Threaded 51.3mm (2.02") i.d. bottom bracket shell to accept English-threaded bottom bracket & crank applications - CNC-machined aluminum with three steel connecting bolts to prevent independent rotation
Truvativ's BashGuard keeps your chainring(s) safe. It is designed to work with their BoxGuide chain guide (sold separately) for complete chain management. It's made from tough polycarbonate to take freeride and downhill abuse, and it's 4 bolt, 104 BCD compatible.
- Crank Arm Length: 175mm - Interface: ISIS - Position: Left
The svelte strength of carbon fiber with the swagger of heavy metal. The Descendant Carbon DUB crankset uses a proprietary TruVativ carbon construction process, delivering a crankset light enough for XC, yet durable enough for Enduro. Featuring SRAM’s DUB technology, this design simplifies the relationship of the spindle to the bottom bracket. DUB-powered cranksets mean simplicity, compatibility, and durability. - SRAM DUB technology creates a lighter, stiffer and stronger crankset - Carbon construction for lightweight durability - Included direct mount X-SYNC 2 chainring provides significantly quieter performance, with better mud clearing and durability - Chainring is designed specifically for Eagle chains and drivetrains - DUB compatible bottom bracket sold separately - Fully compatible with any 1x drivetrain - BB Included: No - Chainring BCD: SRAM Direct Mount - Crank Intended Use: Mountain - Number of Chainrings: Single - Drivetrain Speeds: 12, 11, 10 - Spindle Interface Type: SRAM DUB - Chainline/Hub Compatibility: 141/148 Boost Hubs
$41.00 - $41.99
Slap on TruVativ's RockGuard and pin it through the rough. It's made from tough polycarbonate to take freeride and downhill abuse, and it's 4 bolt, 104 BCD compatible.
$13.99 - $26.99
• Square taper interface • Only includes left crank
- Horizontal square interface - Only includes left crank
- Steel chainring with forged alloy crank arms and double chainguard - Compatible with 3/32" chains - 45mm chainline - Spindle Type: 118 SQR JIS
- Sunlite Cottered Pins
• Compatible with mini hex chainrings
- Youth sized 1pc cranks - Pin style chainring retention - Accepts 1/2" pedals
- Compatible with 1/2" pedals - Forged steel - 24 TPI
$9.39 - $19.77
- Forged steel - 24 TPI
- Material: Heat-treated 4130 Chromoly - Splines: 8 - Diameter: 19mm - Length: 5.7/8" (150mm) - Spindle Bolts: 8x1mm (Included) - Compatibility: Fits Stolen OEM/MOB/SIC Mission Transit, Rant 8-S, Sunday Saker and most other 19mm, 8 spline cranks
The MOB crank features 4130 tubular chromoly arms and a 19mm, 8-spline, heat-treated chromoly spindle. - M10x1.5mm flush mount spindle bolts - M10x1.5mm sprocket bolt - M8x1.25 (6mm allen key) arm bolts - Weight: 36.6-ounces
$58.49 - $75.99
Shimano's 9-sped Alivio crankset is a solid replacement for your tired, worn out cranks. They give you the gears you need to quickly cruise through the city or take on the steepest trails. They are chainguard compatible, so if you're using these cranks on a commuter, your pant cuffs aren't in danger. Plus, the chainrings shift super-quick and precise.
$36.99 - $39.99
Shimano Altus M311 cranksets provide durability and reliable shifting for triple chainring drivetrains. - Hyperdrive SG-X chainrings - 7/8-speed compatible - Spindle interface type: Square Taper JIS
Shimano's super-stiff SLX Crankset offers trail riders efficient power transfer and low weight to blast up mountains, plus the rugged durability to scorch back down. Shimano's Hollowtech II design integrates the crankarms and bottom bracket into a single unit with a beefy spindle, spinning on large-diameter bearings with ultra-wide spacing for maximum rigidity and strength. From XC smooth to enduro burl, you can expect smooth, effortless shifting from Shimano's SLX crankset.
$106.99 - $122.99
Finding the right gear is easy with Shimano's Sora Crankset. Lightweight, stiff aluminum crankarms provide excellent power transfer, while the ramped and pinned chainrings boost shifting speed and precision.
$23.99 - $26.99
The Tourney TY501 crankset provides crisp, reliable shifting for your triple chainring drivetrain. - Precision indexed shifting - 8/7/6-speed compatible - 3 crank length specification available - Precise chain line control - Light and reliable shifting - Versatile performance - Wide compatibility with multiple components - Quick and precise assembly
Page 1 of 10 Next page