Pedals

The Flash is iSSi's minimalist take on the traditional two-sided clipless pedal. It performs as well on the trail as it does on the commute. - Bushing / Sealed bearing spindle, 52.5mm - Models with longer spindles available in BlackOut - SPD-compatible cleats and mounting hardware included

Wellgo B-Series BMX/Mountain Platform Pedals. Molded pins

- Large pedal platform - Lower platform height for pedaling stability - Robust retention claws provide smooth engagement and release - Customize the entry and release tension settings - Strong, durable chrome-moly spindle with 8 mm hex wrench mount - Sealed mechanism - SM-SH51 Cleat included - 1.0 mm cleat spacer included - Binding: Dual sided - Cartridge axle - Cleat retention adjuster - Average weight: 342g - Optional cleat: SM-SH56 - Pedal Type: Off-Road (SPD)

- Wide pedal-to-shoe contact - Lower platform height for pedaling stability - Integrated cage increases stability and control when not clipped in and protects binding mechanism against impacts - Robust retention claws provide smooth engagement and release - Customize the entry and release tension settings - Strong, durable chrome-molly spindle with 8 mm hex wrench mount - Sealed mechanism - 1.0 mm cleat spacer included - Binding Dual sided - SM-SH51 Cleat included - Cleat retention adjuster - Integrated cage - Cartridge axle - Average weight: 438g - Optional cleat: SM-SH56 - Pedal Type: Off-Road (SPD)

PD-EH500 pedals FEATURE - One side SPD, the other side flat - Light action binding makes frequent stepping-in & out easier - Better grip on flat side for wet condition BENEFIT - Convenient road touring pedal - Optimized for urban riding - Multi-condition - Best match with CT or MT shoes

Shimano's M520s are affordable clipless pedals that are easy to enter and exit, and built to last. They boast dual-sided Shimano SPD bindings, which make them perfect for mountain bikers or roadies who prefer wearing walkable shoes with recessed cleats. The bindings are adjustable for dialing in the perfect entry and exit tension, and they have an open, mud-shedding design that prevents clogging. Chromoly axles and sealed bearings add tons of durability. - 380 grams (pair)

Shimano's M540s are race-ready clipless pedals that don't require a team budget. These rugged, light beauties feature dual-sided Shimano SPD bindings that are easy to enter and exit and deliver excellent power transfer and maneuverability. The bindings are adjustable for dialing in the perfect tension and these sweet pedals have an open mud-shedding design to prevent clogging. Plus, the M540s are built to last with chromoly axles and sealed-cartridge bearings. - 352 grams (pair)

Stable and Efficient: Wide bearing placement and low platform height promote an even load distribution and increase pedaling stability for maximum power transfer Superb Mud-Shedding: Rounded surface edges and open binding design ensure reliable performance even in the most challenging conditions - Exceptional Durability: Strong chrome-moly spindle and low-maintenance sealed bearings spin smoothly season after season - Dual Axle Options: Available in standard or a 3mm shorter axle to match Q-factor of Shimano SPD-SL road pedals, providing a smooth transition for road riders getting into gravel - Low Weight: At a wispy 315 grams per pair, the XTR PD-M9200 pedals won’t slow you down - Pedal Axle Material: Chromoly Steel - Pedal Body: Aluminum - Size: 9/16"

PD-R7000 NEW FEATURE - Carbon fiber reinforced resin pedal body - Wide contact area - 265g/pr (25g/pr lighter than PD-5800) BENEFIT - Optimum power transfer - Lightweight - Aerodynamic image - Color: CFRP - Average weight: 265 g - Road clearance: 31° - Binding: Single Sided - Cleat included: SM-SH11 - Optional cleat: SM-SH10 / SM-SH12 - Pedal Type: Road - Reflector: SM-PD65

- Easy step in, easy step out - Lighter spring tension optimized for beginner riders - Larger entry target for easier engagement - Cascaded features from top-tier systems - Extra-wide platform transfers pedaling power efficiently - Durable stainless steel body plate reduces flex and pedal body wear - Sealed mechanism - Single Sided Binding - Cartridge axle - Cleat retention adjuster - Average weight: 320g - Road clearance: 30 - Cleat included: SM-SH11 - Optional cleat: SM-SH10, SM-SH12 - Pedal Type: Road

Shimano Ultegra R8000 pedals. - Pro-level performance and lightweight for the enthusiast - The legacy of Shimano design, quality and performance - Carbon-composite body - Extra-wide platform for a more efficient transfer of power - Adjustable entry and release tension settings - 4mm longer axle available - Low stack height - 0.7mm lower than PD-6800 - Model Number: PD-R8000 - Series: Ultegra - Pedal System: SPD-SL - Average Weight: 248 grams

While staying true to the original Twisted PC’s style, the Twisted PRO offers a significantly larger body shape, slimmer height and more concave while still being built around a traditional loose-ball bearing configuration. Features: - High-strength Nylon composite - 12 oversized pins per side - Traditional looseball bearings - Chromoly spindle - High-strength plastic composite - Wider & longer pedal body - Larger concave area - Slimmer profile Specs: - Spindle: 9/16" - Width: 104mm - Length: 98mm - Weight: 14.6 oz (pair)

Dimension Combo Pedal Sets are assembled with size large toe clips, straps and reflectors. - Pedal Body Material: Plastic - Pedal Spindle: 9/16-inch - Pedal Type: Toe Clip Compatible - Spindle Material: Chromoly Steel - Weight: 475g

Dimension Junior Pedals. - Molded nylon, 1-piece, caged-type pedals - Built-in reflectors, will not accept toe clips - Overall pedal size is 80 x 60mm - Pedal Body Material: Plastic - Pedal Spindle: 9/16-inch or 1/2-inch - Pedal Type: Platform - Spindle Material: Chromoly Steel - Weight: 230g (9/16-inch); 304g (1/2-inch)

The DEFTRAP will revolutionize what you should expect from a nylon composite pedal with it's non-offset symmetrical platform to offer added stability behind the spindle, a true concave pedal profile so your feet sink into it, 10 total pins (8 replaceable cr-mo pins and 2 molded pins), our tried and true sealed bearings and DU bushing system, and top tier nylon and glass fiber composite material to create a pedal that feels unlike anything on the market. With a focus on ride quality, increased foot support, added stability, leading traction, ability to skim over rocks, and even coming in 10 colors-the DEFTRAP will challenge you to rebel against the conventional perception that a value pedal cannot rival the best pedals on the market!

THE CONCAVE EVOLUTION IS MODERNIZED Elevated. Elegant. The new standard. Our approach with the SUPERVILLAIN pedal was not to simply make a new pedal. We wanted to make a true work of art, the ultimate concave masterpiece that is lighter, stronger, and sleeker than anything we have created prior. With only essential material remaining, we scoured every gram via classy radiuses and chamfered detailing around every pin and every corner. We are known for creating the world's greatest concave pedals and raising that bar was the launching pad for the new SUPERVILLAIN. Unifying the language and focusing on our trademark non-offset pedal profile design, the SUPERVILLAIN shares the same symmetrical construct found on the acclaimed TMAC and Deftrap pedals. With increased support on the backside of the spindle, riders can find proper foot placement quicker, have a more solid engagement with the pedal, maximizing our industry-leading 2.5mm deep concave profile (per side). Featuring a large 113mm x 105mm functional footprint and 14 dual access pins per side…the SUPERVILLAIN has a locked in feel that people love and expect from DEITY. With a goal to reduce every gram possible, the skeletal structure of the SUPERVILLAIN pedal is a work of art with chamfered angles and smooth outside edges, reducing snags and hang-ups on rocks. The SUPERVILLAIN elevates our premiere flat pedal line and takes what people love about the TMAC and raises the bar to new heights! With an emphasis on developing a pedal that is elegant and modern, we aim to amaze you with the level of detail found on every mm of this pedal. - The concave evolution is modernized - The most "locked in" feeling pedal in the world - Trademark Non-Offset Symmetrical pedal profile for added foot support and stability - 113x105mm Pedal Body - 14mm in center at the thinnest - Featuring a deep industry-leading 2.5mm concave profile - 14 dual access loc-tite pins per side - Extruded and machined from 6061 T6 aluminum - Detailed chamfering throughout - Featuring a satin finish with a deep color luster - Lasered graphics - Includes an extra set of pedal pins - Featuring DEITY’s load distribution system to prevent bearing blowout - Rigorous real world tested for 2 years - 420 grams

Crank Brothers' most versatile pedal. The Candy excels at it all – cyclocross, XC, trail, all mountain. 4-sided entry enables superior mud-shedding capability, and customizable float and release angles create a dialed-in feel. - Spindle material: Forged scm 435 chromoly steel - Body material: One piece composite - Wing material: Stamped steel - Spring material: 300 series stainless steel - Release angle: 15° / 20° - Q-factor: 52mm - Inner bearing type: Igus LL-glide bearing - Outer bearing type: Enduro cartridge bearing - Cleat: Premium brass cleats with shims included - Weight: 294g per pair - Warranty: 5 years

Crank Brothers' Candy 3 pedals combine 4-sided cages for super-easy entry/exit with CNC'd aluminum platforms for low weight, great foot stability, and on-trail durability. The Candy 3s feature chromoly axles, stainless steel springs, CNC machined aluminum wings, and an open design that sheds mud fast, making them ideal for sloppy conditions and cyclocross. They're also enhanced with inner needle bearings and water-tight internals for consistently smooth pedaling.

Crank Brothers' Eggbeaters are 4-sided, which makes them super easy to enter and exit. Their open design makes them shed mud and debris quickly, and these pedals feature 6-degrees of knee-friendly float. The Eggbeater 1s feature chromoly axles, stainless-steel springs, and steel bodies.

The Dak pedals are the Dakota Roche signature model that feature 14 large hexagon molded pins on both sides for maximum grip. - Slim profile - Large surface area - Heat treated 4130 spindle - 9/16"

Designed for commanding performance on trails and gravel roads. These pedals are simultaneously lighter and thinner than other XC pedals with an exceptionally low stack height, while also having more platform area for control and power transfer. An open center between the cages means increased mud shedding compared to other SPD-compatible pedals. Maximum Shoe Contact The large platform area maximizes pedal and shoe contact. This creates unprecedented control and power transfer for XC pedals. With many SPD-compatible XC pedals, the only point of contact between the shoe and pedal is the cleat and cage, where it can feel like pedaling on a golf ball. With ALT XC Clipless Pedals, the shoe contacts the pedal body for enhanced performance on gravel and trails alike. Best In Class ALT XC Clipless Pedals are lighter, feature more platform area, and have a thinner pedal body than the competition for maximum control, power transfer, and ground clearance. Stainless Durability These pedals will outlast your bike. The SPD-compatible stainless steel binding assemblies and axles create strong, rust-free pedals that are ready to ride hard on the nastiest dirt on the map. Crisp SPD Clipping Clipping in and out needs to be simple, quick, and reliable. The ALT XC Clipless Pedals feature an SPD-compatible stainless steel binding that will work with your existing SPD cleats. They are optimized for the Wolf Tooth cleats that are included in the box. We improved the clipping experience so you can swiftly clip in at the start of the race, stay clipped in when it matters most, and unclip as quickly as needed. Adjustable Q Factor Adjusting the Q factor (pedal stance width) moves the pedal toward or away from the center of the bike. ALT XC Clipless Pedals feature patent-pending Q factor adjustment options of 51, 55, and 59mm to fine-tune your fit, and ship set at 55mm. Adjusting Q factor is simple enough to do at home. Ground Clearance and Mud Shedding We designed ALT XC Clipless Pedals with a thin profile and open center. A thin profile means a reduced chance of pedal strikes when cornering or riding over rocks and roots. The open center quickly sheds mud that can interfere with clipping in and out to ensure that your clips and unclips are quick and reliable. Reliable Construction ALT XC Clipless Pedals feature machined components from Wolf Tooth HQ here in Minnesota, USA. The internal components use the same proven design from our popular Waveform Aluminum Pedals, including a machined stainless steel axle, three low-friction cartridge bearings, and one igus bushing with a custom radial seal that protects internal components from trail debris. Simply put: these pedals will perform in any/all conditions.

CTRL Performance Trail Clipless Pedals

Designed for unparalleled control and power transfer on dirt trails. No other SPD-compatible trail pedal has a platform that contacts your shoe and locks in your feet like these. They are simultaneously lighter and thinner than other trail pedals with a low stack height. The open center between the cages means increased mud shedding compared to other SPD-compatible pedals.

MAXIMUM SHOE CONTACT

The large platform area maximizes pedal and shoe contact. With many trail pedals, the only point of contact between the shoe and pedal is the cleat and cage, where it can feel like pedaling on a golf ball. With CTRL Performance Trail Clipless Pedals, the shoe contacts the pedal body to lock in your foot for enhanced performance.

Wolf Tooth CTRL Performance Trail Clipless Pedals are designed for unparalleled control and support for all-mountain riding with flawless clip-in/out performance. No other SPD-compatible trail pedal has a large platform (965 mm²) that contacts and locks in your shoe like this. CTRL Performance Trail Clipless Pedals are light (341 g) and thin (16 mm) compared to other trail mountain bike pedals with an exceptionally low stack height. The thin profile means better cornering clearance, while the open center between the binding cages increases mud shedding ability.

Like most Wolf Tooth components and accessories, replacement parts and service guides are available via Wolf Tooth Right to Repair.

Thinner than the competition at 16 mm (compared to the Shimano XTR 9220 at 18.2 mm and the Hope TC at 18.2 mm)

Lighter than the competition at 341 g (compared to Shimano XTR 9220 at 439 g and Hope Trail at 438 g)

Bigger platform area than the competition at 965 mm² (compared to Shimano XTR 9220 at 883 mm² and Hope Trail at 645 mm²)

Fixed Q factor of 55 mm

5 degrees float | 12 degrees release

SPD compatible

Proven axle and bearing design from Waveform Aluminum Pedals

Designed and tested at Wolf Tooth in Minnesota, USA

All SPD pedals benefit from simple regular maintenance. For best performance apply a drop of oil to the rear binding every 50 hours of riding or if you notice higher than normal clip in/out force. See the service guide for more information

Apply WT-G Precision Bike Grease to the pedal threads before installing pedals on crankarms

Compatible with SPD cleats; Wolf Tooth cleats included

Fits all standard cranks with 9/16-20 tpi right- and left-hand threads – some kid's bikes and vintage bikes may have smaller incompatible threads

Wolf Tooth CTRL Trail Clipless Pedals are designed for unparalleled control and support for all-mountain riding with flawless clip-in/out performance. No other SPD-compatible trail pedal has a large platform (941 mm2) that contacts the shoe and locks in the shoe like this. CTRL Trail Clipless Pedals are simultaneously lighter (326 g) and thinner (15 mm) than all other trail mountain bike pedals with an exceptionally low stack height. The thin profile means better cornering clearance, while the open center between the binding cages increases mud shedding ability. The CTRL Trail Clipless Pedals have adjustable Q factor in 4 mm increments. Inside the pedal is a stainless steel axle, three bearings, and two spacers. Spacers and bearings can be rearranged for Q factors of 51, 55, or 59 mm. This is simple enough for anyone to do at home. A spacer kit including 4x 2mm spacers is available for purchase to further fine tune Q factor adjustment. Like most Wolf Tooth components and accessories, replacement parts and service guides are available via Wolf Tooth Right to Repair. - Thinner than the competition at 15 mm (compared to the Shimano XTR 9220 at 18.2 mm and the Hope TC at 18.2 mm) - Lighter than the competition at 326 g (compared to Shimano XTR 9220 at 439 g and Hope Trail at 438 g) - Bigger platform area than the competition at 941 mm2 (compared to Shimano XTR 9220 at 883 mm2 and Hope Trail at 645 mm2) - Adjustable Q factor range of 51, 55, and 59 mm (additional 53 and 57 mm options available as 2 mm spacers sold separately with spacer kit) . Pedals ship in 55 mm position. - Proven axle and bearing design from Waveform Aluminum Pedals - Designed, tested, and machined at Wolf Tooth in Minnesota, USA

Wolf Tooth DEL Gravel Race Clipless Pedals feature a one-sided design for peak speed and consistent performance in gravel races. These bike pedals are exceptionally lightweight at only 216 g, while still featuring a large platform for maximum power transfer and a connected feel that approaches that of a road pedal. The one-sided design features an open center between the binding cages for mud shedding. It has all the advantages of a road pedal, but with a shoe and cleat system that works in all conditions. The DEL Gravel Race Clipless Pedals have an adjustable Q factor of 4 mm increments. Inside the pedal is a stainless steel axle, three bearings, and two spacer. The spacers and bearings can be rearranged for Q factors of 51, 55, or 59 mm. This is simple enough for anyone to do at home. A spacer kit including 4x 2mm spacers is available for purchase to further fine tune Q Factor adjustment. Like most Wolf Tooth components and accessories, replacement parts and service guides are available via Wolf Tooth Right to Repair. - Thinner than the competition at 14.7 mm (compared to Xpedo MF8 at 17 mm, Shimano XTR 9200 at 16.5 mm, and Eggbeater 3 at 17 mm) - Lighter weight than the competition at 216 g (compared to Xpedo MF8 at 220 g, Shimano XTR 9200 at 316 g, and Eggbeater 3 at 265 g) - Larger platform area for power transfer than the competition at 559 mm2 (compared to Xpedo MF8 at 46 mm2, Shimano XTR 9200 at 144 mm2 and Eggbeater 3 at 102 mm2) - Adjustable Q factor options of 51, 55, and 59 mm (53 and 57 mm also available via spacer kit sold separately) . Pedals ship in 55 mm position. - Proven axle and bearing design from Waveform Aluminum Pedals - Designed, tested, and machined at Wolf Tooth in Minnesota, USA

Elite Performance

ALT MK0 brings our proven XC race platform to another level. DLC-coated Ti axles, PVD-coated Ti hardware, and aggressive machining drops 49g of weight. At 246g per pair, they are built for extreme performance in World Cup XC and gravel racing. ALT MK0 are substantially lighter, thinner, and offer better power transfer than any other SPD compatible pedal.

MK0 components are proudly machined at Wolf Tooth HQ in Minnesota, USA.

Unrivaled Power Transfer

MK0 ALT XC Clipless Pedals feature an extra large platform area that maximizes pedal to shoe contact, creating unprecedented power transfer when compared to other XC pedals. Most SPD-compatible XC pedals only contact the shoe at the cleat and cage interface, which can feel like pedaling on a golf ball.

Crisp SPD Interface

MK0 ALT XC Clipless Pedals feature an SPD-compatible stainless steel binding that works with your existing SPD cleats, and are optimized for our Wolf Tooth MK0 stainless steel cleats, included in the box. We improved the clip in and out experience so you can swiftly clip in at the start of the race, stay clipped in when it matters most, and unclip as quickly as needed.

Wolf Tooth MK0 ALT XC Clipless Pedals are designed for commanding performance on trails and gravel roads. These pedals are simultaneously lighter and thinner than their Shimano, Hope, and HT counterparts, with an exceptionally low stack height, while also having more platform area for control and power transfer. This body design also features a more open center for better mud clearance than other clipless bike pedals. The SPD-compatible clip-in/out experience is quick and precise, with Wolf Tooth cleats included.

The MK0 ALT XC Clipless Pedals have an adjustable Q factor in 4 mm increments. Inside the pedal is a stainless steel axle, three bearings, and two spacers. The spacers and bearings can be rearranged for Q factors of 51, 55, or 59 mm. This is simple enough for anyone to do at home. A spacer kit including four 2 mm spacers is available for purchase to further fine tune Q Factor adjustment. Like most Wolf Tooth components and accessories, replacement parts and service guides are available via Wolf Tooth Right to Repair.

Thinner than the competition at 14.5 mm (compared to HT M2T at 17.5 mm, Shimano XTR 9200 at 16.5 mm and Hope RC at 18 mm)

Lighter than the competition at 246 g per set (compared to HT M2T at 260 g, Shimano XTR 9200 at 316 g and Hope RC at 322 g)

Larger platform area than the competition at 413 mm² (compared to HT M2T at 357 mm² and Shimano XTR 9200 at 144 mm²)

Adjustable Q factor options of 51, 55, and 59 mm. Pedals ship in 55 mm position

5 degrees float | 12 degrees release

SPD compatible

Proven axle and bearing design with three cartridge bearings and one igus bushing for smooth operation and long life

Designed, tested, and machined at Wolf Tooth in Minnesota, USA

Apply WT-G Precision Bike Grease to the pedal threads before installing pedals on crankarms

All SPD pedals benefit from simple regular maintenance. For best performance, apply a drop of oil to the rear binding every 50 hours of riding or if you notice higher than normal clip in/out force. See the service guide for more information

Compatible with SPD cleats; Wolf Tooth cleats included

Fits all standard cranks with 9/16-20 tpi right- and left-hand threads – some kid's bikes and vintage bikes may have smaller incompatible threads

Elite Performance

DEL MK0 takes our race winning gravel platform to another level. DLC-coated Ti axles, PVD-coated Ti hardware, and aggressive machining drops 43g of weight. At 174g per pair, they're purpose-built to rack up wins in the Lifetime Grand Prix, Gravel Earth, and UCI Gravel Series. DEL MK0 are substantially lighter, thinner, and offer better power transfer than any other 2-bolt clipless pedal. Ever.

MK0 components are proudly machined at Wolf Tooth HQ in Minnesota, USA.

Unrivaled Power Transfer

MK0 DEL Gravel Race Clipless Pedals feature a large platform area that maximizes pedal to shoe contact for unrivaled power transfer in a race-specific design. They feel more like a road shoe and pedal setup, rather than your run of the mill MTB shoe and XC pedal combination.

Adjustable Q Factor

Adjusting the Q factor (pedal stance width) moves the pedal toward or away from the center of the bike. MK0 DEL Gravel Race Clipless Pedals feature patent-pending Q factor adjustment options of 51, 55, and 59mm to fine-tune your fit, and ship set at 55mm. Adjusting Q factor is simple enough to do at home.

Wolf Tooth MK0 DEL Gravel Race Clipless Pedals are the lightest full-featured SPD-compatible pedals with a total weight of 174g. Extensive CNC machining is used to achieve the lowest possible weight while still maintaining excellent strength. They use a one-sided design for peak speed and consistent performance in gravel races. They feature a large platform for maximum power transfer and a connected feel that approaches that of a road pedal. The one-sided design features an open center between the binding cages for mud shedding. It has all the advantages of a road pedal, but with a shoe and cleat system that works in all conditions.

The MK0 DEL Gravel Race Clipless Pedals have an adjustable Q factor of 4 mm increments. Inside the pedal is a stainless steel axle, three bearings, and two spacer. The spacers and bearings can be rearranged for Q factors of 51, 55, or 59 mm. This is simple enough for anyone to do at home. A spacer kit including four 2 mm spacers is available for purchase to further fine tune Q Factor adjustment. Like most Wolf Tooth components and accessories, replacement parts and service guides are available via Wolf Tooth Right to Repair.

Thinner than the competition at 14.5 mm (compared to HT M2T at 17.5 mm, Shimano XTR 9200 at 16.5 mm, Xpedo MF8 at 17 mm and Look X-One G Ti at 18 mm)

Lighter weight than the competition at 174 g per set (compared to HT M2T at 260 g, Shimano XTR 9200 at 316 g, Xpedo MF8 at 220 g, and Look X-One G Ti at 240 g)

Larger platform area for power transfer than the competition at 559 mm² (compared to HT M2T at 357 mm², Shimano XTR 9200 at 144 mm² and Xpedo MF8 at 46 mm²)

Adjustable Q factor options of 51, 55, and 59 mm (53 and 57 mm also available via spacer kit sold separately). Pedals ship in 55 mm position

5 degrees float | 12 degrees release

SPD compatible

Proven axle and bearing design with three cartridge bearings and one igus bushing for smooth operation and long life

Designed, tested, and machined at Wolf Tooth in Minnesota, USA

Apply WT-G Precision Bike Grease to the pedal threads before installing pedals on crankarms

NOTE: Using any titanium axle pedal with a titanium crankset will increase the risk of the pedal axle becoming permanently stuck in the crank arm. Always use anti-seize but be aware that this will not completely eliminate the risk

All SPD pedals benefit from simple regular maintenance. For best performance, apply a drop of oil to the rear binding every 50 hours of riding or if you notice higher than normal clip in/out force. See the service guide for more information

Compatible with SPD cleats; Wolf Tooth cleats included

Fits all standard cranks with 9/16-20 tpi right- and left-hand threads – some kids' bikes and vintage bikes may have smaller incompatible threads

Wolf Tooth Ripsaw Aluminum Pedals feature a slim, lightweight design with a slight convex profile. The large, asymmetric machined aluminum platform provides strong foot support for all-mountain riding, while the thin convex profile is just 7mm thick at the leading edge. Inside the pedal are three fully sealed cartridge bearings, a stainless steel axle, a igus bushing, and a custom radial seal to protect internal components against trail debris. Slim Convex Profile Ripsaw pedals are 12.5mm thick in the center and just 7mm thick in the front and rear edges. This profile is supportive and comfortable for all riders, while performing exceptionally well for riders who prefer pedaling with a mid-foot position or for shoes that do not have much structure or support. Extra Grip Each side of the pedal has 12 stainless steel rear-loading 4.5mm pins for loads of traction. An additional six 4.5mm pins ship with the pedal. Shorter 3mm pins are available as replacement parts to customize the convexity of the pedal; by installing shorter pins on the edges, the convex profile is emphasized. Formed with Purpose The slight convex profile of the pedal body is tallest at the pedal spindle. The shape then tapers toward each edge from there. This profile aligns perfectly with the arch of your foot and provides a strong platform for power transfer. Reliable Performance Three low-friction, fully sealed cartridge bearings and one igus bushing with a custom radial seal protect internal components against trail debris for riding in all conditions. Precision Machining Each Ripsaw Aluminum Pedal body begins as a billet of raw aluminum. After 37 minutes in our CNC mills, the result is a beautifully crafted pedal body that is ready for anodizing and assembly. If you’re a nerd for machining, you’ll appreciate the intricate gradients and machine paths.

- Optimized for Gravity riding with a large pedal body and extra grip
- Eight optional/replaceable rear-loading traction pins per pedal (four per side)
- Premium stainless steel axles, bindings, and hardware
- Compatible with SPD cleats; Wolf Tooth cleats included
- 15mm thickness, 410g weight, platform area 1,201 square mm
- Adjustable Q factor in 4mm increments by rearranging spacers and bearings inside the pedal. Allows Q factors of 51, 55, or 59mm. This is simple enough for anyone to do at home
- Proven axle and bearing design carry over from Waveform aluminum pedals
- Fully serviceable with all replacement parts available

Waveform Pedals are designed for all-mountain riding, from XC to downhill. Available in two different sizes, proportionally scaled to provide a supportive platform that's shaped to match the footprint of your shoe. They have a slim, dual-concave profile that is 14mm thick at the perimeter and just 12.5mm thick in the center, cradling your foot for optimal pedal feel. Each side of the pedal has 11 stainless steel rear-loading pins for loads of traction. The design also features a large, tapered leading edge to deflect pedal strikes on rough terrain. A custom radial seal protects three fully sealed cartridge bearings for low-friction riding in all conditions. - Proportionally designed platform, shaped to match shoe profile - Slim, concave profile with large tapered leading edge to deflect pedal strikes - 3 low friction, fully sealed cartridge bearings and 1 Igus bushing per pedal - V-ring rotary seal to protect against contamination - 11 stainless steel, rear-loading pins per side (pins 4.5mm tall), includes 6 extra grip pins - Fully serviceable with a set of hex keys, no special tools needed - Large Platform: 112mm x 106mm

Wolf Tooth Waveform Aluminum Pedals are designed for all-mountain riding, from XC to downhill. They are engineered to lock in your foot with a shape that matches your shoe, rear-loading pins for grip, and a dual-concave profile to further cradle your feet. The pedals come in two sizes, and are proportionally scaled to provide a supportive platform shaped to match the footprint of your shoe. Large is 112mm x 106mm, small is 105mm x 99mm. Dual-Concave Profile: - Waveform pedals are 14mm thick on the perimeter and just 12.5mm thick in the center. This profile cradles your foot, front to back and side to side. Extra Grip: - Each side of the pedal has 11 stainless steel rear-loading pins for loads of traction. An additional six pins ship with each set of pedals and they are available as replacement parts. Shaped with Purpose: - The shape of Waveform Aluminum Pedals matches the footprint of your shoe Reliable Performance: - Three low-friction, fully sealed cartridge bearings and one igus bushing with a custom radial seal protect internal components against trail debris for riding in all conditions. Tapered Edges: - Large, tapered leading edge to deflect pedal strikes on rocky, rooty terrain Two sizes: - Large: 112mm x 106mm - 384g - Small: 105mm x 99mm - 373g Each size is proportionally scaled to match the silhouette of your shoe based on foot size or pedal size preference.